Catálogos >
SKF Maintenance,Lubrication and Power Transmission >
SKF Belt alignment tool TKBA 31

SKF Belt alignment tool TKBA 31
1 / 2Páginas

Excertos do catálogo

SKF Belt Alignment Tool Pro advanced tool allowing pulley and chain drive alignment Belt-driven machinery is used in many industries and applications – including HVAC equipment, milling machines, compressors and camshafts. Aligning belt drives and chain drives accurately helps to reduce wear on belts, pulleys, chains and sprockets. As well as extending belt and pulley life, precise alignment also reduces machine vibration. Typical benefits of this include improved machine performance, a reduction in unscheduled downtime and lower energy costs. SKF’s TKBA 31 Belt alignment tool is part of a series of tools offering a simple way to do this. It accurately aligns pulleys and sprockets and corrects for various types of misalignment The tool has two components: a lasertransmitting unit and a receiver unit. Each is attached quickly and easily – using a powerful magnet – to the inside or outside face of a belt pulley or chain sprocket. The TKBA 31 can be applied to most machines that use V belts, banded belts and ribbed belts – as well as those with chain sprockets. A laser line is projected from the transmitter to the receiver – which is mounted on the opposite pulley. The tool then corrects for vertical angle, horizontal angle and parallel misalignment – including combinations of all three. The TKBA 31 uses a highly visible green laser diode. It can operate over distances up to 6 m (20 ft) – and can even be used outdoors in sunny conditions. Sturdy housings, made from ABS and 2K polymers and an aluminium base help ensure assembly stability and accuracy during alignment. All components of the TKBA 31, including two green laser transmitter/ receivers, three passive targets, wear check gauge, tension checkers and six AAA batteries, are supplied in a sturdy c

Abrir o catálogo na página 1

Accurate alignment of pulleys and sprockets Belt drives are found in a variety of applications, including HVAC, pump installations, paper mills, flour mills, lathe machine, milling machines and conveyors. Sprocket drives are often used in agricultural machinery, compressors and engine camshafts. TKBA belt alignment tools are commonly used in power plants, recycling facilities, chemical plants and food & beverage production. Key benefits of the TKBA 31 include: • Two laser transmitter/receiver units • Each unit uses a green laser diode and can be used for distances up to 6 m (20 ft) –...

Abrir o catálogo na página 2