Catálogos >
SIEMENS Industrial Communication >
Monitoring remote measuring points – even without a local power grid

Monitoring remote measuring points – even without a local power grid
1 / 2Páginas

Excertos do catálogo

Monitoring remote measuring points – even without a local power grid - 1

Promotional package Monitoring remote measuring points – even without a local power grid Offer valid until 31.03.2021 The compact remote terminal unit SIMATIC RTU3041C enables positioning via GPS and monitors remote measuring points, even when no local power grid is available. Due to its optimized energy consumption, the remote terminal unit (RTU) can be used without external power sources. It supplies its own power – via battery or accumulator with solar panel. Also the connected sensors can be supplied with power via the RTU. The RTU records and buffers values of the connected sensors with a time stamp. Data is transmitted to the control center with an integrated LTE modem via mobile wireless. An integrated GPS receiver enables positioning and time synchronization. The configuration of the RTU is very simple and can be performed remotely using a web browser. With the energy-self-sufficient SIMATIC RTU3041C Try out the SIMATIC RTU3041C in a specially priced promotional package! When you buy a promotional package, you can also purchase a sensor at a reduced price! Your benefits ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Consumption-optimized low-power operation Integrated LTE modem (LTE-M/NB-IoT) and positioning via GPS Extended temperature range from -40 to +70°C Data buffering of process values with time stamps Various protocols supported: TeleControl Basic, SINAUT ST7, DNP3 and IEC 60870-5-104 Secured communication via OpenVPN, a secure tunnel of TeleControl Server Basic, or secured e-mail Configuration and firmware updates possible from abroad Integrated analog and digital inputs, as well as digital outputs Optional extension board enables connection of additional sensors via Modbus RTU and HART Multidrop Sensors can be supplied with power via the RTU Optional additional enclosure protects against flooding (IP68)

Abrir o catálogo na página 1

Monitoring remote measuring points – even without a local power grid - 2

Order your promotional package now!1) Promotional package SIMATIC RTU3041C The promotional package includes2): ◾ ◾ ◾ ◾ SIMATIC RTU3041C3) Extension board HART/RS485 for RTU3000C Direct-mount antenna GPS antenna with 2 m connecting cable Select your sensor: When you buy a promotional package, you can purchase one of these sensors at a reduced price. Please contact your Siemens sales representative for this purpose. The reduced prices for sensors do not apply to orders via the Siemens Industry Mall. SITRANS TS500 Ultrasonic level transmitter Temperature sensor SITRANS P220 Capacitive level...

Abrir o catálogo na página 2