Catálogos >
Sesotec GmbH >
RAYCON D+MXLW

RAYCON D+MXLW
1 / 4Páginas

Excertos do catálogo

X-ray source X-RAY INSPECTION RAYCON D+ MX LW Intelligent curtainless X-ray inspection system for light or sharp-edged packaged products Conformity & Accuracy Safety for people & product Simple operating concept Hygienic design concept Efficiency in all areas Reliable and fas

Abrir o catálogo na página 1

RAYCON exceeds international standards: YOUR PRIORITIES, OUR ANSWERS: Optimum X-ray inspection with the 6P concept Our X-ray systems have been specially developed for use in the food industry and reliably detect foreign bodies such as metals, glass, ceramics, stones, raw bones, PVC and many other product defects. Through this precise inspection, conformity with all important guidelines of the food industry such as IFS, BRC or FSSC 22000 are fulfilled and reliable protection against complaints and recalls can be ensured. The RAYCON D+ MX LW is curtainless and therefore especially suitable...

Abrir o catálogo na página 2

Detection of product defects Curtainless machine Due to the omission of curtains, the RAYCON D+ MX LW is perfect for inspecting light products. The RAYCON D+ MX LW reliably detects reliably product defects such as missing, broken or deformed products. Multi-lane The RAYCON D+ MX allows simultaneous product inspection on up to 4 lines, i.e. products from several production lines can be combined on one device. However, the products to be inspected per lane must always be the same. Open modular design provides for easy access to the conveying area in the product zone without tool for...

Abrir o catálogo na página 3

Functional diagram The system consists of the following main components: A X-ray tube: Here the X-rays are generated electrically. They exit the tube through a narrow slit and penetrate the products to be inspected/examined from the bottom to the top as a fan-shaped beam. 1832 ± 50 mm B X-ray beam C Transport system: A PE flat belt (self-guiding) transports the product to be examined evenly through the X-ray beam. This makes it possible to scan the product line by line. D Detector unit: The linear detector installed above the inspection aperture converts the incoming X-ray beams into an...

Abrir o catálogo na página 4