Catálogos >
Sesotec GmbH >
RAYCON D+MX

RAYCON D+MX
1 / 4Páginas

Excertos do catálogo

X-ray source X-RAY INSPECTION RAYCON D+ MX Intelligent X-ray inspection system for packaged products Conformity & Accuracy Safety for people & product Simple operating concept Hygienic design concept Efficiency in all areas Reliable and fas

Abrir o catálogo na página 1

RAYCON exceeds international standards: YOUR PRIORITIES, OUR ANSWERS: Optimum X-ray inspection with the 6P concept Our X-ray systems have been specially developed for use in the food industry and reliably detect foreign bodies such as metals, glass, ceramics, stones, raw bones, PVC and many other product defects. Through this precise inspection, conformity with all important guidelines of the food industry such as IFS, BRC or FSSC 22000 are fulfilled and reliable protection against complaints and recalls can be ensured. Glass 1,5 mm Bones Knife fracture Reliable detection of metallic and...

Abrir o catálogo na página 2

Up to 20 different products can be conveyed in any order. The software detects which product is currently passing through the beam and selects the appropriate parameter set within milliseconds. The RAYCON D+ MX allows simultaneous product inspection on up to 4 lines, i.e. products from several production lines can be combined on one device. However, the products to be inspected per lane must always be the same. Zone-analyzer The „zone-analyzer“ software allows the definition of zones within an X-ray image. Counting and weighing, for example, can be done separately for each zone, providing...

Abrir o catálogo na página 3

Functional diagram The system consists of the following main components: A X-ray tube: Here the X-rays are generated electrically. They exit the tube through a narrow slit and penetrate the products to be inspected/examined from the bottom to the top as a fan-shaped beam. C Transport system: A PE flat belt (self-guiding) transports the product to be examined evenly through the X-ray beam. This makes it possible to scan the product line by line. D Detector unit: The linear detector installed above the inspection aperture converts the incoming X-ray beams into an electrical signal from which...

Abrir o catálogo na página 4