Catálogos >
SENECA | AUTOMATION INTERFACES >
Voltage / Current simulator meter (handheld)

Voltage / Current simulator meter (handheld)
1 / 2Páginas

Excertos do catálogo

Voltage / Current simulator meter (handheld) - 1

TEST-4 VOLTAGE / CURRENT HANDHELD SIMULATOR / METER Highlights • Ramp Generator on Up/ Down Signals • Input / Output 0..21mA 0..11V Test-4 is a reliable support for calibration sessions, laboratory tests and of analog measurements simulation controlled by industrial devices (controllers, DAQ systems etc.). With a total accuracy better than 0.1%, and a whole resolution of • Low Consuption OLED Display 1 μA / 1 mV, Test-4 achieve accurate calibration results. • Multifunction Encoder Button It allows the simulation of ramps in both tension and current value • Anti-slip Cover (active or passive). Test-4 is supplied by 220 Vac power network with external AC/DC adapter or by 2 NiMH batteries providing • Rechargeable Batteries approximately 20 hours of run time. • Multi Language Display

Abrir o catálogo na página 1

Voltage / Current simulator meter (handheld) - 2

VOLTAGE / CURRENT HANDHELD SIMULATOR / METER CONNECTIONS TECHNICAL FEATURES SIGNAL MEASUREMENT ACTIVE CURRENT PASSIVE CURRENT VOLTAGE APPLICATION NOTE SIMULATION SIGNALS FROM THE FIELD CALIBRATION PROCESS FOR SENSORS, ACTUATORS, TURNING, PLC, REGULATORS ETC. INTERFACES Input / Output ORDER CODES PACKAGE CONTENTS type batteries, 2650 mAh Via Austria, 26 • 35127 Padova - (I) - Tel. +39 049 87.05.359 Fax +39 049 87.06.287 • www.seneca.it • info@seneca.it The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the...

Abrir o catálogo na página 2