Catálogos >
Seba Hydrometrie GmbH & Co. KG >
LogCom-Q/UnilogCom-Q

LogCom-Q/UnilogCom-Q
1 / 4Páginas

Excertos do catálogo

LogCom-Q, UniLogCom-Q, Q-Modul Flow module for stationary and mobile operation • • Robust, compact, multi-channel data logger with an integrated cellular modem optimised for continuous flow measurement in small channels, streams and partially filled pipes. Available in various formats LogCom-Q with an impact-resistant aluminum protective housing, suspended battery compartment and a threaded connection for monitoting well pipes of Ø 4“ and UnilogCom-Q for installation in existing protective housings / switch cabinets LCD with three multi-function buttons to display current measured values and system state (Option: Backlit LCD) Vertically or horizontally insertable, 1.04 MHz pulse-doppler-sensor for detecting flow velocity profiles in max. 18 cells Integrated ultrasonic sensor for precise measurement of water level (0.1 % FS) up to 1.3 m Transfer Options: mobile data retrieval, FTP Push, TCP push, SMS push, SMS Alarms Connection options for additional sensors (e.g. SEBA pressure probe DS(T) 22) D12_LogCom-Q_UnilogCom-Q_S1_

Abrir o catálogo na página 1

System Description The flow rate is measured in up to 18 layers by an ultrasonic flow velocity sensor using the pulse Doppler method. An average flow velocity in the detection area of the sound beam is then calculated from these values. The total flow at the measurement cross-section is determined from the average flow velocity, the water level and the channel profile information. This measurement method is suitable for free flowing water and backed up water. The data for water level, average flow velocity and calculated flow rate are stored locally in a batteryoperated data logger and...

Abrir o catálogo na página 2

The Q-module can also be used as an external module with other sensors and data loggers (e.g UniLogCom). Operation with SEBA-Config The operating software SEBAConfig offers various additional functions to simplify the operation and the configuration. The profile configuration is conducted by the following steps: • • • Definition of the input channels with scaling in the basic SI unit used for calculation Definition of profile with the profile shapes: rectangle, trapezo , V-profile, round profile, egg-profile and mouth-profile Calibration: The calibration factors can either be specified...

Abrir o catálogo na página 3

Technical data Configuration interface 3 x Control-LEDs Operational Keys Display Connection for battery compartment (only for Type LogCom) Sensor interface 32 Bit Flash controller with integrated WatchDog RTC IC Real Time Clock Memory capacity: Save interval: Measurement routines: Single value, average value, event clock, Delta mode Communications Interface: RS 232 (standard) Bluetooth® (optional) Combi sensor: Ultrasonic pulse Doppler Interface cable (USB/RS 232) BlueCon 2 (Bluetooth®) Digital: 1 x RS 485 (SHWP) for combination sensor and other digital SEBA sensors, 1 x pulse Measurement...

Abrir o catálogo na página 4