205-scm-topsetmaster
1 / 16Páginas

topset master automatic throughfeed moulder

topset master automatic throughfeed moulder for large parts The ideal solution for making large frames, semi-finished parts for the construction sector, structural work joists and profiles, wide parquet and squared lengths of timber in general. The Topset Master automatic throughfeed moulder was developed to guarantee high quality finishing and to limit production costs, making it advantageous to work on both small batches and big orders. • NO COMPROMISES FOR HEAVY DUTY STOCK REMOVAL: Topset Master allows machining even for more than one shift per day, always guaranteeing excellent surface...

rip saw. cutting. planing. profiling. tenoning. boring-routing. packing.

topset master technological advantages “HD” SPINDLES with three pairs of bearings (for a total of 6) preloaded with high precision to guarantee a top quality finish, for heavy duty stock removal, maintaining lasting precision and repeatability. RAPID MACHINE SET-UP SYSTEM With an adjusting screw, locking operations are made fast and easy without the need for equipment such as grease nipples. ON-BOARD SHARPENING DEVICE (JOINTER) FOR STRAIGHT KNIVES ON HORIZONTAL SPINDLES This device uses an electronically-operated automatic system for axial and radial movement of the stone to guarantee high...

topset master machine structure MACHINING CAPACITY Ideal for sectors such as construction, structural work, contracting, outdoor indoor furniture and squared lengths of timber in general, this machine can work on max. cross-sections of 305x200 mm and remove up to 60 mm of stock spindle. BASE To get a good quality finish good tools and sturdy spindles aren’t enough. A machine structure that doesn’t generate vibrations is needed. The single-block structure of the Topset Master is suitably sized using CAD systems able to check its behaviour in response to machining stresses.

FEED SYSTEM To guarantee good feed capacity irrespective of the material machined, level of stock removal or feed speed, a large number of feed wheels is provided, increasing the contact surface between rollers and workpiece. To reduce friction between the workpiece and worktable and to further promote feed, there are motor-driven rollers on the worktable. PHT When machining resinous, wet or warped wood, there is a greater risk that the workpieces will come to a stop in the machine. This risk increases as the feed speed rises and in the presence of automatic feeders, with consequent wasted...

topset master Tool holder spindles 1 SET-UP Each tool substitution requires many operations which take time and skill. To make it advantageous to produce small batches and have negligible tooling times without the need for experts, we patented a rapid “Setup” system. In the case of an upper horizontal spindle, for example, by simply setting the minimum tool diameter the presser shoes located before and after the tool and the workpiece feed chain are automatically aligned. To avoid manual operations with the risk of operator error and wasted time, every time a change of thickness is needed,...

SPINDLE COUNTER-SUPPORTS When a tool change is needed on the horizontal spindles, to speed up operations and make them easy in complete safety, on the counter-support there is a precision centring system, a rapid locking system and a safety system which, if the counter-support is not fitted or locked, prevents spindle start up. To save even more time, axial positioning of the horizontal spindles takes place with the spindle moving and machine operating. PRESSER SHOES To further reduce the risk of the workpiece jamming in the machine irrespective of the machining allowance to be removed, the...

topset master options JOINTER To obtain a good finish with feed speeds higher than 15÷20 m/min, on-board tool sharpening (jointer) is required. This significantly increases production rates. On Topset Master on-board sharpening is possible on horizontal spindles, for straight knives tools. On-board sharpening operations usually take a long time and must be performed by experts. To make these operations simple, fast and precise, on Topset Master the stone automatically moves both axially and radially thanks to an electronic system with speed that can be preset depending on the type of...

topset master SPINDLES WITH HSK TOOL HOLDER To make it advantageous to also machine small batches, with very low set-up times and risk of errors, the vertical tool holder spindles can be equipped with an HSK tool holder. CORNER CHAMFERING UNIT For workpieces with variable cross-section which need chamfering, to avoid having to make a series of adjustments each time or managing a large set of tools, an additional unit can be supplied for automatically performing top left chamfering irrespective of the cross-section. AUTOMATIC FEEDERS To facilitate loading operations and continuously feed the...

topset master “Control 100 PC” electronic control When many program changes are needed during a shift, it is a good idea to equip the machine with a NC to slash set-up times and avoid the need for expert manpower. The “Control 100 PC” man-machine interface allows: - generation of programs or changes to existing programs (no knowledge of programming language required) - guiding of all operations to be performed - management of tool parameters - indication of faults or malfunctions - “teleservice” with SCM Group For total process management, the “GT Soft” software can be used to process the...

TOPSET MASTER TOPSET MASTER Min./max. machining width (finished cross-section) Minimum machining height (finished cross-section) Minimum length of single workpiece Feed speed Motor power Spindle speed of rotation Tool holder spindle diameter Axial adjustment of vertical spindles relative to the worktable Axial adjustment of horizontal spindles relative to the right-hand fence Min./max. diameter of surface planer tool Min./max. diameter of profiling tool Diameter of spindle holder cylinders MAIN OPTIONS Speed up to 60 m/min. “Jointer” on-board sharpening device Spindles with HSK tool holder...