Catálogos >
Schweitzer Engineering Laboratories >
SEL-2242 Chassis/Backplane

SEL-2242 Chassis/Backplane
1 / 8Páginas

Excertos do catálogo

The SEL-2242 Chassis/Backplane is a 10-slot chassis for SEL Axion® systems. This data sheet provides installation Front and Rear View Figure 1 SEL-2242 10-Slot Front Panel, Rack-Mount Figure 2 SEL-2242 10-Slot Rear View, Panel-Mount Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 1

Figure 3 SEL-2242 4-Slot Front Panel, Rack-Mount Figure 4 SEL-2242 4-Slot Rear View, Panel-Mount Figure 5 SEL-2242 Dual 4-Slot Front Panel, Rack-Mount SEL-2242 Data Sheet Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 2

SEL-2242 Dual 4-Slot Rear View, Panel-Mount Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 3

Device Placement You can mount the Axion in a sheltered indoor environment (a building or an enclosed cabinet) that does not exceed the temperature and humidity RACK-/SURFACE-MOUNT CHASSIS CABLE ACCESS VIEW MINIMUM CLEARANCE REQUIRED Figure 7 SEL-2240 10-Slot Rack- and Surface-Mount Dimensions Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 4

RACK-/SURFACE-MOUNT CHASSIS CABLE ACCESS VIEW MINIMUM CLEARANCE REQUIRED Figure 8 SEL-2240 4-Slot Rack- and Surface-Mount Dimensions Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 5

RACK-/SURFACE-MOUNT CHASSIS CABLE ACCESS VIEW MINIMUM CLEARANCE REQUIRED Figure 9 SEL-2240 Dual 4-Slot Rack- and Surface-Mount Dimensions Protective Connector Covers The SEL-2242 is shipped with protective covers installed in each backplane connector. Prior to installing any Axion modules, grasp either side of the connector cover and pull it straight out of the connector. We suggest that you leave the covers inserted in any unused slots in order to provide dust and mechanical protection. Figure 10 Protective Connector Cover Schweitzer Engineering Laboratories, Inc.

Abrir o catálogo na página 6

Specifications Digital Radio Telephone RF Immunity: General Operating Temperature Range –40° to +85°C (–40° to +185°F) Note: Not applicable to UL applications. Conducted RF Immunity: IEC 60255-22-6:2001 Severity Level: 10 Vrms IEC 61000-4-6:2008 Severity Level: 10 Vrms Surge Immunity: Operating Environment IEC 60255-22-5:2008 Severity Level: 1 kV Line to Line, 2 kV Line to Earth IEC 61000-4-5:2005 Severity Level: 1 kV Line to Line, 2 kV Line to Earth IEC 60255-22-4:2008 Severity Level: Class A: 4 kV, 5 kHz; 2 kV, 5 kHz on communication ports IEC 61000-4-4:2011 Severity Level: 4 kV, 5 kHz...

Abrir o catálogo na página 7

© 2011–2013 by Schweitzer Engineering Laboratories, Inc. All rights reserved. All brand or product names appearing in this document are the trademark or registered trademark of their respective holders. No SEL trademarks may be used without written permission. SEL products appearing in this document may be covered by U.S. and Foreign patents. SCHWEITZER ENGINEERING LABORATORIES 2350 NE Hopkins Court • Pullman, WA 99163-5603 USA Phone: +1.509.332.1890 • Fax: +1.509.332.7990 Internet: www.selinc.com • E-mail: info@selinc.com Schweitzer Engineering Laboratories, Inc. reserves all rights and...

Abrir o catálogo na página 8