Catálogos >
SAMSON >
Type 43-6 Temperature Regulator

Type 43-6 Temperature Regulator
1 / 4Páginas

Excertos do catálogo

T 2174 EN Type 43-6 Temperature Regulator Series 43 Self-operated Temperature Regulators · ANSI version Application Set points from 30 to 300 °F (0 to 150 °C) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 · Pressure rating Class 150/ 300 · Suitable for gases up to 175 °F (80 °C), liquids up to 300 °F (150 °C) · For cooling applications The valve opens when the temperature rises. Special features •• Low-maintenance proportional regulators requiring no auxiliary energy •• Temperature sensor suitable for installation in any desired position and for operation at high excess temperatures of 120 °F (50 °C) above the set point, designed for operating pressures up to 580 psi (40 bar) •• Spring-loaded, single-seated valve without pressure balancing or plug balanced by a bellows •• Compact design with particularly low overall height •• Valve body made of stainless steel Version (Fig. 1) The regulator consists of a valve and a control thermostat with set point adjuster, capillary tube and temperature sensor operating according to the adsorption principle. Temperature regulators with Type 2430 Control Thermostat and Type 2436 Valve –– Body made of stainless steel (A351 CF8M) with screwed ends (½ NPT, ¾ NPT and 1 NPT female thread), Class 300 –– Flanged valve body made of stainless steel (A351 CF8M) NPS ½ and 1, Class 150 Additionally, the following are available: –– Safety temperature monitors (STM) and safety temperature limiters (STL). For more details refer to Data Sheets u T 2183 and u T 2185. –– Further details on the selection application of typetested equipment can be found in Information Sheet u T 2181. Fig. 1: Type 43-6 Temperature Regulator · Body with screwed ends –– Accessories and combinations –– Thermowell: copper, Class 300 CrNiMo steel, Class 300 –– Double adapter Do3 or manual adjuster Data Sheet u T 2176 Special versions –– 16.4 ft (5 m) or 32.8 ft (10 m) capillary tube length –– Oil-resistant internal valve parts SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt am

Abrir o catálogo na página 1

The temperature regulators work according to the adsorption principle. The temperature of the measured medium creates a pressure in the sensor which is proportional to the measured temperature. This pressure is transferred through the capillary tube (12) to the operating element (10) and converted into a positioning force. This force causes the pin of the operating element (11) to move the plug stem (4) with the valve plug (3). By turning the set point adjuster (9), the point of response is changed over the valve spring (5). The valves are balanced by a metal bellows (6). The balancing...

Abrir o catálogo na página 2

Table 1: Technical data · All pressures in bar (gauge) Valve Type 43-6 Temperature Regulator Female thread Connection Pressure rating Class 300 (body with screwed ends) 1)|Class 150 (flanged body) Max. perm. differential pressure Δp Leakage class according to IEC 60534-4 Type 2430 Control Thermostat Set point range 2) (continuously adjustable) Capillary tube length Perm. temperature at the sensor 120° F (50 °C) above the adjusted set point Max. permissible ambient temperature Permissible pressure at sensor/thermowell 1) 2) 3) Max. input pressure 275 psi (19 bar) Further set point ranges on...

Abrir o catálogo na página 3

Table 4: Dimensions and weights Regulators with body with screwed ends or flanged body · A351 CF8M (1.4408) Connection size Female thread Width across flats SW Weight with bulb sensor and thermowell (approx.) 1) 1) Version without thermowell: minus 0.44 lb (0.2 kg) Body with screwed ends Flanged body Bulb sensor with thermowell or screw gland Ordering text Type 43-6 Temperature Regulator Body material: stainless steel (A351 CF8M) Version with screwed ends … NPT female thread or flanged valve body NPS … Set point range … °F (°C) Specifications subject to change without notice

Abrir o catálogo na página 4