Catálogos >
Renu Electronics GmbH >
FPEM-1616P-V2

FPEM-1616P-V2
1 / 2Páginas

Excertos do catálogo

Power Supply In the Flexisoft select FPEM-1616P or V2 for FPEM-1616P-V2 unit. FPEM-1616P-V2QUICK START GUIDE FPEM-1616P-V2: 16 Bi-directional type inputs, 16 PNP type transistor outputs. For more information, please refer user manual which will be available in FlexiSoft software help and/or you can download from REPL website. Dimension Details FRONT VIEW LEFT SIDE VIEW For more Information, visit SPECIFICATIONS Environment & Approvals PANEL MOUNTINGMounting with base models: With the expansions, while unpacking the unit, user will find two screws already attached with base bottom case. Fix the expansion with the HMI as shown below with these screws. Fix the Expansion connector with the expansion female connector given on base HMI. Apply torque 0.1Nm while fixing with base unit. Mounting with 4.3” base model: Mounting with 7” and 10.1” base model: For 7” and 10.1” HMI models, the procedure of mounting expansions is same. Only instead of horizontal mounting, expansions will mount in vertical directions. Hence, accordingly these bases are having facility to add 3 and 5 expansions at a time respectively. Mounting with 7” base model: Mounting with 10.1” base model:

Abrir o catálogo na página 1

Digital Inputs WARNING This equipment is suitable for use in Class Division 2, Groups A, B, C and D or non-hazardous locations only. • WARNING - EXPLOSION HAZARD - Do not disconnect equipment unless power has been removed or the area is known to be non-hazardous. • WARNING - EXPLOSION HAZARD - Substitution of components may impair suitability for Class I, Division 2. The list of materials used in the construction of these devices with name of sealed device -generic name of the material and the supplier's name and type designation. It is recommended that the user periodically inspect the...

Abrir o catálogo na página 2