Catálogos >
PRIMA POWER >
LPef Series

LPef Series
1 / 8Páginas

Excertos do catálogo

Premium series punch laser combination

Prima Power LPe6/8f – the premium series punch laser combination One + one is more than two The LPef series combines high end servo-electric punching and state of the art fiber laser technology in a manufacturing solution that offers outstanding flexibility, speed, accuracy and productivity to fabricate the most challenging products. Prima Power Touch screen operating system. INCREASED PERFORMANCE Compared with the previous series, the performance values have reached a new level: Punching speed Tool rotation speed Tool change time Laser start Average cycle time * * Using 3 kW fiber...

Abrir o catálogo na página 2

This Green Means® solution has low energy consumption and low maintenance requirement; thus the components produced are not only accurate, they are always economically manufactured. There are two machine sizes available, the LPe6f for max. sheet size 3,074 mm x 1,565 mm and the LPe8f (4,300 mm x 1,565 mm). Safety equipment is not shown in the illustrations. 3

Abrir o catálogo na página 3

WHY PUNCH LASER COMBINATION Very fast reaction times are expected in modern production. The machines need to be flexible and extremely fast for a quick response to production orders, often for very small quantities.The punch laser combination makes it easy: With laser cutting there are: … and when you punch you can also: no burrs no nibble marks no worries about tonnage no tools no die clearance no sharp corners tap countersink form rib make extrusions hem make louvers LPef is unbeatable when it comes to versatility and flexibility, combining multiple operations in one machine. This Lean...

Abrir o catálogo na página 4

Fiber laser cutting The laser used in the system as its most flexible tool is a 2, 3 or 4 kW high brilliance fiber laser. Cutting speed increases in proportion to power. Totally closed cabin design for eye safety and noise reduction is always included with the system. With the integrated fiber laser a wide range of material can be cut such as copper or brass. A significant reduction in operating cost is achieved because the laser has no maintenance requirements, no laser gas is needed and energy consumption is far smaller compared with other solutions. Further benefits are Stainless steel...

Abrir o catálogo na página 5

Flexible automation Reliable unmanned operation with small footprint is a major factor in ensuring cost efficiency in fabrication. The Prima Power range of automation solutions adds productivity and end product value through high performance, accuracy and reliability. LD loading device Prima Power LD is automatic loading device. One fixed or two moving tables can be chosen.With two wagons, production can be arranged with no interruptions when using additional door and separate safety areas for pallet change. Two moving tables give more capacity and can also be connected to COMBO and...

Abrir o catálogo na página 6

LST – loading and stacking robot Loading and stacking robot LST provides a reliable, fully automatic process.The operator is free for other task while machine productivity and utilization increases dramatically. LST loads sheets to the machine, picks up parts from it and stacks them to programmed coordinates in stacking area. Skeletons are unloaded and placed on the skeleton table from machine with the unloading device UDC. LPef with LST (short) The RALC (robot assisted last cut) option eliminates the risk of parts sticking in the skeleton. LPef with LST (long) LSR – loading and stacking...

Abrir o catálogo na página 7