Catálogos >
Pompes Japy >
Manual piston pump automatic siphoning: E1000

Manual piston pump automatic siphoning: E1000
1 / 1Páginas

Excertos do catálogo

Manual piston pump automatic siphoning: E1000 - 1

> MANUAL PISTON POMP AUTOMATIC SIPHONING E1000 Manual piston pump automatic siphoning For diesel fuel, light oil, antifreeze, cooling liquids, windscreen,... FLOW RATE : 600 liters/h on standard rhythm Full metallic pump, iron cast and steel, except: - discharge tubing (flexible tubing 1,5 m + spout) - and suction tubing (smooth tubing PVC 1 m length) What makes its hardiness. Its cast iron piston assembled without any seal avoids seizing and any risks of failure after a long stop of the pump. HOW TO MAKE THE AUTOMATIC SIPHON WORKING ON SECURITY : After having introduced the spout in the empty container, start the pump by moving quickly the arm. As soon as the pump is started, we are able to siphon automatically, by pulling thoroughly the arm near « A » position (at opposite side of the discharge tubing). We must feel the stop after passing through the hard point. By maintaining the arm fully in « A » position, the automatic siphoning continue. Release the arm to stop siphoning. The arm returns automatically on « B » position and siphoning stop immediately. It is possible that siphoning continue with little flow, if you let the discharging tubing in low position. It occurs when something bother the valve (a piece of filings for example) and prevent it to come back to the good position on the For safety sake, you must, after using the pump, hook the spout on the plate as indicated on the above drawing. POSSIBLE OPTIONS : Pump equipped with a flexible plunger Single pump JAPYCHAUFF POMPES JAPY - Pare d'activites cfu Moulin - B.P. 15 - 25490 FESCHES-LE-CHATEL - FRANCE Tel. +33 (0)3 81 9616 47 - Fax+33 (0)3 81 96 12 16 - www.pompes-japy.fr - We reserve the right to make modifications without prior notice.

Abrir o catálogo na página 1