Catálogos >
PETROSYSTEM >
CEION® Measurement Technology

CEION® Measurement Technology
1 / 3Páginas

Excertos do catálogo

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: info@petrosystem.it web: www.petrosystem.it CEION® HIGH RESOLUTION METAL LOSS TECHNOLOGY CEION® is the state-of-the-art metal loss technology. An advanced development of the original ER ratiometric method, the technique measures changes in current density due to material loss. When applied to a Sample and Reference array in the form of a probe or sensor the instrumentation provides a signal-conditioned, calibrated output. The principal parameters of interest are metal loss and process temperature but advanced applications may include others related to localised effects and conductivity due to surface defects, inclusions, conductive deposits or solutions in contact with the electrically conductive path through the metallic sample. In CEION®, precision electronics, inherent noise rejection and configurable, embedded, real-time compensation algorithms combine with sensors designed for micro-structural, thermodynamic and hydrostatic balance to deliver exceptional performance. Corrosion & Pitting Monitors Sand Erosion Monitors Pipeline Flow Assurance Chemical Optimisation First introduced in 1999 the technology has been used to power a wide range of devices including, corrosion probes, sand erosion detectors and pipeline corrosion monitors. Applications on surface and subsea installations, refineries, petrochemical plants and in the laboratory are in service world-wide; including the Gulf of Mexico, West Africa, UK and Norwegian Continental Shelf, Australia, Middle East, North Africa, Latin America and Asia. We are continuously developing new applications for the technology, often sponsored by end-users, targeted at solving specific industry problems.

Abrir o catálogo na página 1

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: info@petrosystem.it web: www.petrosystem.it Application Features of the technique permit a wide range of sensor configurations to deliver performance appropriate to the application, including very responsive sensors for the study of short term events and long life/severe service sensors to meet the demands of deepwater HP/HT production and aggressive process applications. Some typical applications include: Chemical Optimisation Corrosion Inhibitors are widely used to...

Abrir o catálogo na página 2

PETROSYSTEM Srl Via Gaspare Spontini, 29/4 - 00043 Ciampino (Roma) – Italy Tel:+39 06 7932.1621 Fax:+39 06 7932.1160 Email: info@petrosystem.it web: www.petrosystem.it In order to make a basic comparison we have selected a metal loss rate of 4 mils per year (0.1 mm per year) for the table below. This is a level commonly found in carbon steel hydrocarbon systems under normal operating conditions. Higher metal loss rates mean faster responses but it is important to measure quickly and accurately at normal operating metal loss rates so that process changes are detected immediately. *may be...

Abrir o catálogo na página 3