Catálogos >
Panasonic Robot & Welding system solutions >
PerformArc C Series

PerformArc C Series
1 / 1Páginas

Excertos do catálogo

PerformArc C-Series General Information Panasonic PerformArc C Series are dedicated customized robot systems, made 100% on customer request. Equipment Supplied Panasonic welding robot TA-1800 G3 with Windows CE robot controller Panasonic power source YD-500AF2 Digital interface control between robot controller and welding power source Panasonic 350A gas cooled robot torch Panasonic safety holder for robot torch Panasonic wire feeder for robot welding Twin workstations, with tooling plate capacity for each workstation of 0.8 m wide x 0.5 m deep Individual manually operated workstation access doors, protected by safety interlocks Single operation panel mounted to the front of the cell Wire pack installation possible within the cell Lifting holes and eyes for initial system location or future repositioning Torch cleaning unit Depending on customer request Panasonic MIG/MAG power sources YD-350GB2 and YD-350GE2 or YD-500AF2 for pulse welding Panasonic DC or AC/DC TIG power sources YC-300BZ3 and YC-300BP2 Water-cooled welding torch, Fume hood (half / completely closed) Service & extended warranty package DTPS G3 off-line programming & simulation tool Technical Data Options Customer Benefits High quality welding with high production rate Fully proven and tested before delivery All components mounted to a common base for easy transportation, quick setup and future possible location change using crane or forklift Torsion-free design for easy transportation with no programming correction, and for program exchanges between the robots for production expansion Jagenbergstr. 11a, 41468 Neuss, Germany Factory Solutions Europe Robot and Welding Systems Europe E-Mail: robots@eu.panasonic.com Web: www.panasonicrobotics.eu a department of Panasonic Industrial Devices Sales Europe GmbH © Subject to technical alterations 01.08.2012

Abrir o catálogo na página 1