Brushless Motors BMU Series
1 / 32Páginas

Brushless Motors Connector Type Easy speed control, easier to use. New connector type with smart wiring.

The new connector type in the compact, high-efficiency BMU series, directly connects the motor and driver together. Smart wiring and watertight and dust-resistant performance (degree of protection IP66) have been achieved. Connector Type Features A connector has been newly developed for small motors. Direct connection between the motor and driver is now possible. Together with the improved motor structure, watertight and dust-resistant performance has also been increased, achieving a IP66 level of protection✽. ✽Motor only The gasket and O-ring are built-in, improving water ingress...

300 W 200 W NexBL is the new brushless motor from Oriental Motor. The entire motor structure has been redesigned in an effort to maximize the required performance. Unprecedented compact size, high power, and high efficiency. Brushless Motor Features Brushless motors don't have brushes, which are the weak point of DC motors, so they create little noise and are maintenance-free. Since they use a permanent magnet, they are compact, high-power, and high-efficiency. Broad Speed Control Range Stable Speed Control is Possible Brushless motors have a broader range of speed control than AC speed...

Many convenient functions that a speed control motor requires. Here are the main points Speed Indicator Load Factor Indicator Protective Functions Displays the motor speed in 1 r/min With the rated torque of the motor at Contains various protective functions, units. By calculating the conveyor gear 100%, the load factor can be expressed such as an overload protection ratio and setting gear ratio parameters, function and overvoltage protection the conveyor transportation speed condition during start-up, as well as function. When a protective function activates, the alarm code is displayed...

Easy Operation Turn & Press Turn the dial and set to the desired speed. The speed can be set just by pressing the dial. Start/Stop Can be easily driven and stopped with the operating switch on the front. There is no need to provide a switch externally. Switching the Rotation Direction The motor's rotation direction can be switched with the rotation direction switch. It can even be changed during operation. Easy Wiring Direct Connection to the Motor Easy connection between the motor and connection cable by inserting the connector and lowering the lock lever. Newly designed for small motors....

An IP66-Compatible High-Efficiency Brushless Motor. Designed to be Compact, High Power and High Efficiency Optimal magnetic design and high-performance materials allow for a stator lamination thickness of only 11.2mm in the NexBL. This thinness achieves a highly efficient power unit that can output 120 W. Compared with a conventional brushless motor of the same output power, the stator plate thickness is reduced by half (for motors with a frame size of 90 mm). Moreover, by using high-performance materials while reducing the amount of material used, costs have been reduced significantly....

■System Configuration Motors, drivers, and connection cables are supplied separately. Connection Cable Combination Type (Motor and gearhead) AC power supply (Main power supply) Pull-out on output shaft side Pull-out on rear of the motor Vertical Pull-out Flexible Coupling (➜ Page 28) Mounting Bracket for Motor and Gearhead✽2 (➜ Page 28) Mounting Bracket for Driver Products✽3 (➜ Page 28) General-purpose Cables for I/O Signals (➜ Page 27) Power Supply Cable (➜ Page 27) Motor Covers (➜ Page 29) Dust-resistant and Watertight Front Covers✽3 (➜ Page 30) ✽1 Not supplied. ✽2 Refer to page 28 for...

❖WARNING: Connecting the BLE2 to three-phase 400 VAC will damage the product.

Please purchase a motor, a driver, and a connection cable. ^Pinion Shaft type ^Round Shaft type Output Power • Gearheads ^Parallel Shaft Gearheads • Drivers Output Power Output Power #A number indicating the gear ratio is specified where the box □ is located in the product name.

•For detailed information about standards, please see the Oriental Motor website. •The values correspond to each specification and characteristics of a stand-alone motor. The speed - torque characteristics show the values when rated voltage is applied. •A number indicating the gear ratio is specified where the box □ is located in the product name.

•For detailed information about standards, please see the Oriental Motor website. •The values correspond to each specification and characteristics of a stand-alone motor. The speed - torque characteristics show the values when rated voltage is applied. •A number indicating the gear ratio is specified where the box □ is located in the product name.

■ Speed - Torque Characteristics Continuous Duty Region: Continuous operation is possible in this region. Limited Duty Region: This region is used primarily when accelerating. •30 W «60 W Max. Instantaneous Torque Max. Instantaneous Torque •The values correspond to each specification and characteristics of a stand-alone motor. The speed - torque characteristics show the values when rated voltage is applied. •Overload alarm detection time- The overload alarm is generated if the operation goes beyond the continuous duty region. The detection time for this overload alarm can be set from 0.1 -...

#Round Shaft Type ❖ Only when output power is 200 W ❖ It is also applicable when digitally setting the deceleration time to below 0.1 seconds.

● The motor dimensions in this catalogue are the dimensions when a separately sold connection cable (the attached. Listed masses do not include the mass of the connection cable. ● Refer to page 20 for the dimensions and masses of connection cables. ● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page 20 ● A number indicating the gear ratio is specified where the box □ is located in the product name. ●Motor ◇ 30 W ●Combination Type with a Parallel Shaft Gearhead Motor Product Name Gearhead Product Name Gear Ratio ●When connection cable is...