Catálogos >
OMRON >
E3T Data Sheet

E3T Data Sheet
1 / 26Páginas

Excertos do catálogo

Ultracompact, Ultrathin Photoelectric Sensor with Built-in Amplifier E3T The Improved E3T Series with Easier, Smoother Mounting and Installation • The series includes Through-beam, Long-distance (2 m) Sensors (E3T-ST3@). • Easy installation with M3-mounting Sensors (E3T-ST@@M, E3T-FD@@M, and E3T-SL@@M). • Small Cylindrical Sensors for one-point mounting are also available (E3T-C@@@(S)). • Infrared Sensors added to the Series (E3T-@T@@(M)F). For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 15. Lineup Overview Sensing method Rectangular type Flat Cylindrical type

Abrir o catálogo na página 1

Ordering Information Sensors [Refer to Dimensions on page 16.] I I Red light I I Infrared light M2-mounting Sensors A set of mounting screws is included with the Sensor. *1. The model number of the Emitter is expressed by adding an "L" to the set model number in the table. Example: E3T-ST11 -L 2M The model number of the Receiver is expressed by adding a "D" to the set model number in the table. Example: E3T-ST11-D 2M *2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. *3. Models are available either with or without the E39-R37-CA Reflector...

Abrir o catálogo na página 2

E3T Small Cylindrical Sensors Sensing method A set of mounting nuts is included with the Sensor. Sensing distance Operation mode Dark-ON Emitter + Receiver Diffusereflective (with adjuster) Accessories (Order Separately) Accessories for M2-mounting Sensors These accessories are not included with the Sensor. Order them separately if required. Applicable Sensor Dimensions page Sensing distance 200 mm, Minimum detectable object (reference value) 0.5-mm dia. Sensing distance 100 mm, Minimum detectable object (reference value) 0.5-mm dia. Sensing distance 30 mm, Minimum detectable object...

Abrir o catálogo na página 3

E3T Accessories for M3-mounting Sensors These accessories are not included with the Sensor. Order them separately if required. Applicable Sensor Dimensions page 2 (One each for Emitter and Receiver) Slits for Through-beam Side-view Sensors E3T-ST1@M@ 1 dia. Mounting Bracket for Side-view Sensors *1 Mounting Bracket for Flat Sensors Back-mounting Spacer for Flat Sensors --Use this Spacer when mounting a Flat Sensor (E3T-FD@@M) from the back. SUS Screw Set for Flat Sensors *2 E3T-FD@@M Remarks Sensing distance 100 mm, Minimum detectable object (reference value) 0.5-mm dia. Sensing distance 30...

Abrir o catálogo na página 4

E3T Ratings and Specifications Sensing method Rectangular type (Flat) Rectangular type (Side-view) Sensing distance Standard sensing object Minimum detectable object (reference value) Hysteresis (white paper) Black/white error Directional angle Light source (wavelength) Power supply voltage Current consumption Control output Load power supply voltage: 26.4 VDC max. Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA) Open-collector output Protection circuits Power supply and control output reverse polarity...

Abrir o catálogo na página 5

Retro-reflective (without M.S.R. function) Cylindrical type (Side-view) Cylindrical type (Top-view) Rectangular type (Side-view) Sensing distance Standard sensing object Minimum detectable object (reference value) Hysteresis (white paper) Black/white error Directional angle Light source (wavelength) Power supply voltage Current consumption Control output Load power supply voltage: 30 VDC max. Load current: 80 mA max. (residual voltage: 1 V max.) Open-collector output Load power supply voltage: 26.4 VDC max. Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50...

Abrir o catálogo na página 6

Appearance Rectangular type (Flat) Cylindrical type (Top-view) Rectangular type (Side-view) Rectangular type (Flat) Light-ON Dark-ON Light-ON Dark-ON Sensing distance Standard sensing object Minimum detectable object (reference value) Hysteresis (white paper) Black/white error Directional angle Light source (wavelength) Power supply voltage Current consumption 0.15-mm dia. non-glossy object (sensing distance 10 mm) 15% or less of the sensing distance 12 to 24 VDC ±10%, ripple (p-p) 10% max. 20 mA max. Load power supply voltage: 26.4 VDC max. Load power supply voltage: 30 Load current: 50 mA...

Abrir o catálogo na página 7

E3T Engineering Data (Reference Value) M2-mounting and M3-mounting Sensors Parallel Operating Range Through-beam E3T-ST1@ + E39-S63 E3T-ST1@ + E39-S63 E3T-ST1@M + E39-S76A/S76B (Overall Dia- E3T-ST1@M + E39-S76A/S76B (Enlarged Digram) agram) Distance Y (mm) (A Slit is mounted to the Emitter and Receiver.) (A Slit is mounted to the Emitter and Receiver.) (A Slit is mounted to the Emitter and Receiver.) (A Slit is mounted to the Emitter and Receiver.) Without Slit (A Slit is mounted to the Emitter and Receiver.) (A Slit is mounted to the Emitter and Receiver.) Without Slit E3T-ST1@F + E39-S63...

Abrir o catálogo na página 8

1-dia Slit Without Slit Without Slit (A Slit is mounted to the Emitter and Receiver.) (A Slit is mounted to the Emitter and Receiver.) −200 (A Slit is mounted to the Emitter and Receiver.) E3T-FT1@F + E39-S64 (Enlarged Diagram) Distance Y (mm) E3T-FT1@F + E39-S64 (Overall Diagram) Distance Y (mm) (A Slit is mounted to the Emitter and Receiver.) Without Slit 0.8 1 1.2 1.4 Without Slit Distance X (m) (A Slit is mounted to the Emitter and Receiver.) Sensing object: 50 x 50 mm white paper (A Slit is mounted to the Emitter and Receiver.) Operating Range Limited-reflective Sensing object: 50 x 50...

Abrir o catálogo na página 9

E3T Inclination Detection Area Characteristic Limited-reflective E3T-SL1@(M) (Right to Left) Distance (mm) E3T-SL1@(M) (Top to Bottom) 20 Stainless steel Stainless steel BGS-reflective E3T-FL1@ (Right to Left) White paper Center line White paper Center line Glass t: 0.7 mm Stainless steel E3T-FL2@ (Top to Bottom) Angle of inclination White paper Center line Angle of inclination White paper Center line Stainless steel Stainless steel

Abrir o catálogo na página 10

E3T Excess Gain vs. Set Distance Through-beam E3T-ST2@(M) Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio

Abrir o catálogo na página 11