Catálogos >
OMRON >
D5F

D5F
1 / 5Páginas

Excertos do catálogo

High-precision Optical Switch Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch • No-contact structure for high reliability. • Ceramic materials in measuring part for superior resistance to abrasion. • Two different output types (PNP and NPN) available. • Less abrasion and damage of mechanical contacts compared to switches with contacts, reducing fluctuation in the output. • More compact than previous OMRON models: 40% less mass, 15% lighter across the operating width. Be sure to read Safety Precautions on page 4 and Safety Precautions for All Limit Switches. Ordering Information Output configuration Contact form Operation indicator PNP open collector (+ common) NPN open collector (− common) Cable length Specifications Ratings Power supply voltage Output current Power consumption Operating speed Leakage current Residual voltage Insulation resistance 100 MΩ min. (at 500 VDC) between each terminal and non-current-carrying metal part 1,100 VAC between each terminal and non-current-carrying metal part Vibration resistance Shock resistance Mechanical Electrical Repeat accuracy Ambient temperature *3 Operating: −10°C to +60°C (with no icing) Ambient humidity Switch body: Approx. 50 g; Cord: Approx. 23 g/m Note: The above figures are initial values. *1. Durability values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 30% to 70%RH. Contact your OMRON sales representative for more detailed information on other operating environments. *2. Measurements were conducted repeatedly at the same point. The value is 1 μm max. for 200 measurements. For other conditions in detail, contact your OMRON sales representative. *3. The ambient operating temperature varies depending on the current. Refer to the following Engineering Data. Deviation in electrical durability after 1,000,000 operations Temperature coefficient * * Operating position fluctuation rate for a change of 1°C in the ambient temperature.

Abrir o catálogo na página 1

Repeat Accuracy (Reference Data)

Abrir o catálogo na página 2

D5F Structure and Nomenclature Structure LED indicator O-ring (NBR) Photodiode (for signal) Seal cap (NBR) Ceramic chip Ball lens Photodiode (for monitoring) Half mirror LED light source (NBR) O-ring Seal rubber (NBR) Output Circuit Diagram D5F-3C@0 Internal circuit Black Output Blue 0 V Internal circuit 100 mA max. Black Output Blue 0 V Output transistor: (load) Output transistor: (load)

Abrir o catálogo na página 3

D5F Dimensions and Operating Characteristics D5F-2B@0 D5F-3C@0 Red LED operation indicator Four, 4.5 dia. mounting holes * Replace @ in the model number with the code for the Switch you require (i.e. 1 for Switches with a 1,000-mm cable and 3 for Switches with a 3,000-mm cable). Ceramic chip (measuring part) 44.5 Operating force Release force Pretravel Movement Differential Total travel Note: 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions Safety Precautions Refer to Safety Precautions for All Limit Switches. Precautions for Safe Use Do not impose any force...

Abrir o catálogo na página 4

Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER...

Abrir o catálogo na página 5