Catálogos >
OMEGA >
Universal DIN Rail Transmitter

Universal DIN Rail Transmitter
1 / 2Páginas

Excertos do catálogo

Universal DIN Rail Transmitter Shown actual size. U imple Configuration S Via USB Port U niversal Pt100, U Thermocouple, mV, mA Input U solated Input I TXDIN1610 U ushbutton User Trim P U to 20 mA, 2-Wire Output 4 TXDIN1620 U ushbutton User Trim P U -Wire Isolated 3 Voltage Output TXDIN1630 U ual Relay Outputs D 250 Vac 1 Amp U elay Isolated From R Each Other The TXDIN1600 Series is a new generation DIN rail mounted temperature transmitter. It has been designed to accept most common process and temperature sensor inputs and provide the user with a standard two wire 4 to 20 mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the TXDIN1600 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the TXDIN1600 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. Free Softw Download, are* omega.comVisit /ftp The TXDIN1600 is also provided with user pushbutton trim, allowing trim adjustments at both 4 mA and 20 mA. The user trim function can be locked during configuration if not required. The range led indicates out of range input during normal operation, during user trim it is used to indicate the stage of trim. Isolation: Input to output tested at 500 Vdc Ambient: Operating -20 to 70°C (-4 to 158°F) 10 to 95% RH non-condensing Storage: -40 to 85°C (-40 to 185°F) Approvals: CE tested to BS EN 61326 Dimensions: 17.5 W x 56.4 D x 90 mm L (0.7 x 2.2 x 3.5") Material: Polmide 6.6 Self Extinguishing Terminals: Screw terminal Cable: 2.5 mm (0.1") max Color: Gray Output TXDIN1610 Type: 2-wire current sink; signal range 4 to 20 mA; full range 3.8 to 24 mA Supply: 11 to 30 Vdc, 24V nominal giving max loop load of 600 R @ 24V Response Time: <500 ms to reach 95% of final value; start up time <3 s Calibration Accuracy: ±5 uA Loop Effects: Loop ripple 0.03% of FSR; supply sensitivity 0.05 uA/°C; supply ripple rejection <±5 uA error @ 1V rms 50 Hz ripple Protection: Reverse connection and over-voltage protection, max over voltage current 100 mA * Requires USB cable, OM-62-USB-CABLE, sold separately, see next p

Abrir o catálogo na página 1

TXDIN1620 Shown smaller than actual size. TXDIN1610 User Trim: Raise and lower buttons, active for TXDIN1630 offset when output is between 3.8 to 6 mA, span between 18 to 22 mA, trim lock option Inputs TXDIN1620 Input Range Accuracy* Type: 3-wire voltage output with -200 to 1370°C programmable ranges: 0 to 10, 0 to 5, (-328 to 2498°F) 2 to 10, 1 to 5, and 0 to 1V Supply: 15 to 28 Vdc -100 to 1200°C Response Time: <500 ms to reach (-148 to 2192°F) 0.1% of FSR ±0.5°C (±0.9°F) 95% of final value; start up time <3 s -100 to 1000°C [Type T 0.2% FSR ±0.5°C Calibration Accuracy: ±5 mV (-148 to...

Abrir o catálogo na página 2