Catálogos >
NOV Inc. >
Grifter Summary Sheet (English)

Grifter Summary Sheet (English)
1 / 2Páginas

Excertos do catálogo

The Grifter is designed to meet domestic user requirements for handling raw sewage. Using a progressing cavity pump and tri-hammer macerator, this product is available as a unit only or as a packaged pump system. The use of a single motor drive directly coupled to the pump and macerator gives lowest possible design/construction and running costs. The Packaged System features duty and standby pumps, complete with all necessary pipework and factory assembled in a GRP kiosk. Integrally assembled below the pump kiosk is a glass fiber reinforced collection sump. Features • Positive displacement pump • Small bore pipe for rising main • Above sewage, ‘dry’ location of pumps • Tri-hammer macerator • Pre-assembled package with insulated G.R.P. enclosure, containing all pumps, macerator and control equipment • Total design, installation, commissioning and maintenance packages available Benefits • Slow speeds, low wear rates and optimum running time. Grifters consume less than 50% of the energy of conventional centrifugal sewage pumps. • Flow is finely macerated. • Lower installation costs, reduced risk of septicity and smells, greater freedom in routing layouts (will easily follow ground contours). Lower retention times allow a significantly better feed system to small treatment plants. • Routine maintenance can be carried out easily in a clean environment, in-situ. No sump entry risks or hauling pumps up out of the sump - no continual chain certification. • 3 hammer design gives very efficient product disintegration. • Rapid installation, low noise level, fully weatherproof. Can be installed in very remote isolated areas at much lower costs than a conventional pump house construction. • Only one order to one company - single sourcing. industrial@nov.com nov.com/industrial

Abrir o catálogo na página 1

Single or three phrase options available Capacity • Up to 1.5m3/h - Pump Units M12B125/325 Up to 4.0m3/h - Pump Units M12B280/480 Maximum pressure 3 bar • Discharge connection to rising main: 11/2” BSP Union Kiosk • 1528 mm x 1048 mm x 590mm high Sump Depths • 1200 mm or 1600mm as standard Foundation Slab • 1900mm x 1000mm, • 150mm minimum thickness Applications • Effluent from remote dwellings • Sewage from marinas, caravan and other leisure facilities industrial@nov.com nov.com/industrial ©National Oilwell Varco - All rights reserved - 10372_ENG_v02

Abrir o catálogo na página 2