TamAcryl 2000
1 / 2Páginas

{{requestButtons}}

Excertos do catálogo

TamAcryl 2000 - 1

TamAcryl 2000 is a blend of acrylic polymers used in conjunction with an accelerator and catalyst system. Upon mixing of the components, a chemical reaction occurs and a waterproof gel is formed. It is available in two grades - standard and slow set. KEY BENEFITS > Ultra-low viscosity > Swells up to 5% upon contact with water > Very Flexible > 100% > Good chemical resistance > Reacts even in the presence of mineral and saline conditions > Potable water certified > Incorporates anti-corrosion agents TYPICAL APPLICATIONS > Leak sealing > Injection tubes > Void filling > Soil stabilisation > Tightening up normet CONSTRUCTION CHEMICALS TECHNICAL DATA SHEET TECHNICAL DATA Reaction Times The reaction time can be varied to suit prevailing conditions. To ascertain accelerator dosage required use 2 clean disposable containers e.g. plastic cups used in vending machines. Pour an equal amount of Part A and Part B into separate containers, each container should be able to hold the contents of the other, see below. Using the reaction table as a guide, add the accelerator to the Part A and mix. Pour one container into the other repeatedly until the material gels. Use this as a guide to judge accelerator dosage.

Abrir o catálogo na página 1
TamAcryl 2000 - 2

TamAcryl 2000 n rmet Chemical resistance (42 days immersion at 25°C) APPLICATION GUIDELINES TamAcryl 2000 is injected at a ratio of 1:1 Part A: Part B by volume. Ideally using a Twin Piston Pump such as TP2 / TP4 Pump or if extremely careful a single component pump. Cleaning involves using water to remove the resin before it sets. Note: Once the accelerator is added to the Part A it should be used within 24 hours. YIELD 1 kg = 0.92 litres STORAGE TamAcryl 2000 should be stored at room temperature (min 4°C and max 30°C), kept dry and out of direct sunlight. If these conditions are...

Abrir o catálogo na página 2

Todos os catálogos e folhetos técnicos Normet

  1. Spraymec MF 050 VC

    10 Páginas

  2. variomec-xs-040

    10 Páginas

  3. variomec-xs-035-

    10 Páginas

  4. utimec-mf-660-

    13 Páginas

  5. utimec-mf-400-lube

    12 Páginas

  6. utimec-mf-205-per

    13 Páginas

  7. utimec-mf-164-per

    12 Páginas

  8. utimec-mf-100-e-

    12 Páginas

  9. utimec-mf-100

    15 Páginas

  10. rbo

    6 Páginas

  11. multimec-sf-060-

    7 Páginas

  12. MF 100

    12 Páginas

  13. NorStreamer 30 V

    6 Páginas

  14. Spraymec 1050 WPC

    4 Páginas

  15. Semmco Tornado

    3 Páginas

  16. Semmco Alpha 30DV

    10 Páginas

  17. Alpha 30

    10 Páginas

  18. Multimec MF 100

    7 Páginas

  19. Variomec LF 090 D

    7 Páginas

  20. Variomec MF 060 D

    7 Páginas

  21. Himec 9915 B

    6 Páginas

  22. Utilift MF 540

    9 Páginas

  23. Utilift 6605 B

    4 Páginas

  24. Charmec MF 605 DA

    7 Páginas

  25. Variomec MF 050 M

    7 Páginas

  26. Minimec

    4 Páginas

  27. Spraymec 8100 VC

    11 Páginas

  28. BS 7622

    3 Páginas

  29. Tornado

    5 Páginas

  30. Alpha 15 TDH

    5 Páginas

  31. Alpha 20

    6 Páginas

  32. Scamec 2000 S

    5 Páginas

  33. Material cassette

    1 Páginas

  34. Utimec 6160 PER

    3 Páginas

  35. Utimec 6250 CR

    3 Páginas

  36. Utimec 1090 D

    3 Páginas

  37. Fuel cassette

    1 Páginas

  38. Multimec 6600

    3 Páginas

  39. Variomec 1060 D

    3 Páginas

  40. Multimec 1000

    3 Páginas

  41. Crane cassette

    1 Páginas

  42. Utilift 6330 X

    3 Páginas

  43. Himec 9915 BA

    4 Páginas

  44. Himec 9910 B REX

    3 Páginas

  45. Himec 1905 B

    3 Páginas

  46. Himec 1125 B

    3 Páginas

  47. Himec 9905 BT

    3 Páginas

  48. Charmec 6605 B

    3 Páginas

  49. CHARMEC 9825 BE

    3 Páginas

  50. Variomec 1050 M

    3 Páginas

  51. Spraymec 9150 WP

    4 Páginas

  52. Spraymec 9150 WPC

    4 Páginas

  53. Spraymec 6050 WP

    4 Páginas

  54. Spraymec 7110 WPC

    4 Páginas

  55. Spraymec 7110 WP

    4 Páginas