VY series
1 / 24Páginas

Excertos do catálogo

Vacuum Generators In-Line Type of Venturi Vacuum Generator VU,VUM,VY Vacuum Pad Direct Mounting In-Line Type Small-seized In-Line Type Blow-Oﬀ Mechanism Equipped Type Compressed air (P) Vacuum Generator VU （Pipe Type Union Straight） Air powered venturi vacuum can be used in combination with a vacuum pad to handle materials. Vacuum Tube Vacuum Pad Vacuum (V) Work-piece in line vacuum generator coming with a plastic body is very lightweight and compact. VUM Type ( Super small In-line type) ● Super small and lightweight vacuum generator Outer diameter : 0.33 inches (ø8.5mm), Weight : Max. 0.3 oz. (7.7g) ● Nozzle VY Type ( With Blow-Off Mechanism) ● Ejector and Blow-Off Mechanism are integrated. VY Type provides a high cost performance, compared to a normal solenoid valve equipped type. ● Small and lightweight body makes it possible to place on the terminal part of the vacuum piping. High speed cycle of suction and Blow-Off Mechanism is achiev

Abrir o catálogo na página 1

Vacuum Generator VU,VUM,VY ■ Model Designation (Example) Vacuum Generator ⑨ Wrench Size ⑧ Vacuum Filter ⑦ Exhaust port size ⑥ Blow-oﬀ air supply port size ⑤ Air supply port size ④ Vacuum port size Pipe Type Blow-Off Mechanism Equipped Type Performance High-vacuum at low air pressure supply type (Rated supply pressure：50psi ( 0.35MPa)） Small-sized Pipe Type Performance High-vacuum type Performance Large-flow type (Rated supply pressure：72.5psi ( 0.5MPa)） ③ Nozzle bore ■ VU, VUM type Code Nozzle bore 03 H type Vacuum level, Suction flow L type Vacuum level, Suction flow E type Vacuum level,...

Abrir o catálogo na página 2

⑤ Air supply port size Joint type ⑥ Blow-off air supply port size (VY only) 4 ø4mm ⑦ Exhaust port (VU and VY only) No code Silencer vent Code Port type ⑧ Vacuum Filter (VY only) F: with vacuum filter No Code: No vacuum filter ⑨ Wrench Size U: inch wrench spec. (NPT or UNF thread) No Code: metric wrench spec. (metric thread) ■ Specification (VU and VUM） Fluid medium Operating pressure range Rated pressure supply Operating temp. range ■ Specification of Blow-off Mechanism Equipped VY Fluid medium Operating pressure range Rated pressure supply Operating temp. range Lubrication ■ Specification...

Abrir o catálogo na página 3

Filter element Plastic body Vacuum port unit ■ Construction (Blow-Off Mechanism Equipped Type: VY) Tube Cartridge Resin body (15% glass contained PBT) Y-packing (NBR) Sleeve (Nickel-plated brass) Upper stopper (Nickel-plated brass) Locknut (Aluminum) Release needle (SUS303 equivalent steel) Nozzle piston (Nickel-plated brass) Plug (Nickel-plated brass) Elastic sleeve (NBR) Spool packing (HNBR) Lock-claws (Stainless steel) Diffuser spool (Nickel-plated brass) Guide ring (Nickel-plated brass) Release ring (POM) Diffuser spring (Stainless steel) Silencer element (PVF) End plug (Nickel-plated...

Abrir o catálogo na página 4

Blow-Off Mechanism Equipped (VY) Type ■ Example 1 ■ Example 2. Usage with Twin 3-way valve (SVA21). Check valve Connect P Port and PD Port with Check Valve (Purchase separately). The residual pressure between Check Valve and PD Port turns into a blowoff air. The flow rate of the blow-off air is adjusted by a release needle. Blow-off time can be controlled by the tube length between Check Valve and PD Port. Work-piece can be released instantly by adjusting a blow-off pressure and a flow rate. But it is necessary to pay attention not to blow away the work-piece. The above figure shows an...

Abrir o catálogo na página 5

Pipe Type In-Line Union (Nozzle bore: ø0.3 / 0.4 / 0.5 / 0.7mm) Exhaust port Exhaust port Copper alloy free Selectable Fitting Vacuum port Fitting Vacuum port Type VU Pipe Type Union Straight (Silencer vent) Type VU Pipe Type Union Straight Tube Exhaust Exhaust port Fitting Fitting Vacuum port Type VUM Pipe Type Union Straight(vent) Direct Mounting Type (Nozzle bore: ø0.3 / 0.4 / 0.5 / 0.7mm) Air supply port Air supply port Fitting Exhaust port Exhaust port port Thread (Directly mounting on vacuum VU Pipe Type 10-32UNF pad) Vacuum port Straight (Silencer 1/8NPT vent) Air supply port Fitting...

Abrir o catálogo na página 6

VU Vacuum Generator ■ Characteristics Supply pressure - Final vacuum / Suction Flow / Air Consumption VUH07, VUL07, VUE07 Vacuum characteristics Flow characteristics Flow characteristics Pressure supply：0.5MPa (H, L type) 0.35MPa (E type) L type suction ﬂow 20 H type suction ﬂow –13 10 E type suction ﬂow 0 0 0.1 0.2 0.3 0.4 0.5 0.6 Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Vacuum characteristics Vacuum arrival time (Supply pressure H and L types: 72.5psi (0.5MPa), E type: 43.5 to 72.5psi (0.3 to 0.5Mpa))  The following graphs is for reference only since the values vary according to the...

Abrir o catálogo na página 7

http: //www.pisco.com VUM Vacuum Generator ■ Characteristics VUMH03 Vacuum characteristics Flow characteristics Vacuum arrival time Suction flow Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) Vacuum characteristics Flow characteristics Vacuum arrival time Suction flow Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) Vacuum characteristics Flow characteristics Vacuum arrival time Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) ※ Shaded ① to ⑨ line in the graph of “Vacuum arrival time” represents the code and...

Abrir o catálogo na página 8

Vacuum Generator VU,VUM,VY Vacuum characteristics Flow characteristics Vacuum arrival time Suction flow Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) Vacuum characteristics Flow characteristics Vacuum arrival time 12 n ptio 10 um ons ir c A 8 Suction flow 6 Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) Vacuum characteristics Flow characteristics Vacuum arrival time Vacuum arrival time (msec) Flow rate (l/min[ANR]) Suction flow (l/min[ANR]) ※ Shaded ① to ⑨ line in the graph of “Vacuum arrival time” represents the code and length...

Abrir o catálogo na página 9

http: //www.pisco.com Flow characteristics Vacuum arrival time Flow rate (l/min[ANR]) Vacuum arrival time (msec) Vacuum characteristics Suction flow (l/min[ANR]) Suction flow (l/min[ANR]) Suction flow Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) 500 Supply Pressure (MPa) Suction flow (l/min[ANR]) 0.7 400 0.5 Shaded ① 300 ⑨ line in the graph of “Vacuum arrival 0.3 to time” represents 200 Please refer the below for the details. 0.1 100 Vacuum arrival time (msec) Flow rate (l/min[ANR]) Flow rate (l/min(ANR)) Union Straight type Flow characteristics Vacuum arrival time...

Abrir o catálogo na página 10

VY series 1 / 24Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos NIHON PISCO CO.

VY series
1 / 24Páginas