RPV pump
1 / 8Páginas

Excertos do catálogo

Rotary vacuum pump realizing low driving noise, low vibration, low heat generation, low dust generation and long life. Rotary vacuum pump RPV06 Series Characteristics • Contribute to energy saving The top level high efficiency in the industry is realized for the pumping speed per motor power 1(W). → 1.0/1.2 [pumping speed (ℓ/min)/motor power (W)] (50/60Hz) • Light weight and compact Space saving is realized by adoption of the special rotor form. Max weight: about 10.5Kgs. Max. dimension: 125 x 397.6 x 181mm (width x depth x height)* * Max. weight and max. dimension are of 120L type RPV064-120V200. • Low heat generation Low generation of heat is realized by adoption of forced air-cooling system. • Low driving noise and vibration Low noise operation and low vibration are realized by full balancing design for rotary part. Silent : ≦ 58dB / ≦ 63dB (50Hz/60Hz) Vibration : About 1/10 of equivalent other brand models. (*) * Our investigation. Same level as air conditioner or quiet car. • Long life Maintenance free for nearly 30,000 hours operation. (* Under our operating conditions. The product life varies depending on the operation conditions and the inhaled gas (moisture or dust), etc) High durability is realized by adopting of super engineering plastic, which is excellent in self-lubricity and wear resistance, and special surface treatment. Providing minimum clearance between rotor and cylinder wall, realize the fundamentally contactless structure and minimization of sliding parts. Adoption of magnet-coupling, no sliding seal required. • Low generation of dust Lubrication is unnecessary by adoption of the excellent clean vacuum grease for low dust and low volatile. Low dust generation is realized by minimization of sliding parts. Contamination to surrounding area is controlled. • Contribute to environment, and Safe design RoHS compliant and CE marking compliant. (Single-phase 100V with built-in power switch type is not compliant with CE marking.) • Variety of options Not only a pump but also push-in fittings and exhaust cleaners (exhaust mufflers) are prepared. Schematic diagram (example) when using suction transport Vacuum regulator Vacuum pump Exhaust cleaner Vacuum Vacuum tank filter Vacuum supply solenoid valve Pressure sensor Vacuum filter * Compressed air is not necessary for suction transport by using the external vacuum controller VNP, which have direct operating valve for vacuum supply and blow-off solenoid valve. (Compressed air is necessary for blow-off.) Therefore, the consumption amount of compressed air can be remarkably reduced. Must install Blow-off Blow-off air rate solenoid adjustment needle valve External vacuum controller VNP The rotary vacuum pump is a precision equipment. Do not let moisture, debris and dust flow into the pump by always installing a vacuum filter to an

Abrir o catálogo na página 1

Rotary vacuum pump RPV06 Series Operating principle Vacuum port Exhaust port Forced air-cooling vent ① The eccentric rotor is placed in the space formed by the cylinder and plates which sandwich the cylinder. ② When the rotor carries out eccentric rotations, air is inhaled by the pressure difference to atmospheric pressure with increasing capacity of the space formed between the rotor of vacuum port side and cylinder. At the same time, air is discharged with decreasing capacity of the space formed in the rotor of exhaust port side and cylinder. ③ By performing this operation continuously,...

Abrir o catálogo na página 2

Specifications Medium vacuum, 30L Model code Pumping speed (ℓ/min) Final vacuum (Pa abs) Final vacuum (kPa G) 　In-line layout Cylinder layout Ambient temperature (indoor) (°C) Ambient humidity (indoor) Vibration of installation site Altitude of installation site Motor axis to be horizontal 3-phase motor, Built-in thermal protector Single-phase capacitor type induction motor 3-phase motor, Built-in thermal protector Single-phase capacitor type induction motor Heat proof class: 130(B) Built-in thermal protector, Heat proof class: 130(B) Heat proof class: 130(B) Built-in thermal protector,...

Abrir o catálogo na página 3

Rotary vacuum pump RPV06 Series Specifications (Continued from the previous page) Type Model code 　　Parallel layout Cylinder layout 　　Parallel layout Pumping speed (ℓ/min) Atmospheric pressure Ambient temperature (indoor) (°C) Ambient humidity (indoor) Vibration of installation site Altitude of installation site Motor axis to be horizontal 120 3-phase motor, Built-in thermal protector Heat proof class: 130(B) 200 Rated rotation speed (min ) Striking current (A) Operation noise (dB (A)) (*1) Vacuum port size Exhaust port size Dimensions (width x depth x height) (mm) Weight (kg) Cooling...

Abrir o catálogo na página 4

Model Designation (Example) RPV06 (5) Air supply (PS) port size RPV06: Rotary vacuum pump 06 series Tube O.D.(mm) (2) Cylinder numbers and layout, motor power output 4-120 Parallel twin, Parallel triple, Parallel quad, In-line twin, In-line twin, Compression fitting Push-in fitting (*3) Code *1. ø10 fitting cannot be selectable for RPV064-120. *2. ø16 fitting cannot be selectable for RPV06A-40. *3. The thread sizes of pump's port are different depending on (2) the cylinder numbers, layout and motor power output. Please refer to Table-1 (6) Exhaust cleaner (with fittings) Single phase...

Abrir o catálogo na página 5

Rotary vacuum pump RPV06 Series The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. In-line / Twin Parallel / Twin, Model code In-line / Twin / Power switch built-in Medium vacuum, 30L Parallel / Twin / Power switch built-in Low vacuum, 60L Parallel / Triple Low vacuum, 90L * 4: Replaced with vacuum port code. * 5: Replaced with exhaust port code. * 6: Replaced with exhaust cleaner (with fittings) code. * Make-to-order item. 1 pc. in a box Package specification

Abrir o catálogo na página 6

The products listed in this page are ECO-friendly products. * Please refer to page 4 for the details of ECO-friendly products. Model code PCøD-G Model code PLøD-G Push-in fitting straight type for vacuum port PC10-G3 Push-in fitting elbow type for vacuum port PL10-G3 Push-in fitting elbow type for exhaust port PL10-G2 Push-in fitting straight type for exhaust port PC10-G2 PC12-G2 Model code Model code Model code Model code NBCøD-G Compression fitting straight NBC1065-G3 type for vacuum port Compression fitting straight NBC1065-G2 type for exhaust port Replacement element Model code Exhaust...

Abrir o catálogo na página 7

RPV pump 1 / 8Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos NIHON PISCO CO.

RPV pump
1 / 8Páginas