cad

Oval
1 / 80Páginas

Excertos do catálogo

Oval - 1

Long work-pieces with limited suction area like circuit board and semiconductors selection of pad sizes, materials and holder types Pad size:13sizes. Pad material:9types. Holder type:13types. ■ Stroke length of a spring holder is selectable. ・ Conventional long stroke holder (with cover) is integrated into VPC or VPD. Stroke:6, 10, 15 and 20 mm ・ Conventional long stroke holder (without cover) is renewed as VPOC or VPOD. Stroke:20, 30, 40 and 50mm of selections in pad holder for "Copper alloy free" and against "low ozone concentration". -S3 spec.:No copper based metal parts. HNBR or FKM is adopted for

Abrir o catálogo na página 1
Oval - 2

Vacuum Pad Series Vacuum Pad Oval Series ■ Selection list Oval Long work-pieces with limited suction area like circuit board and semiconductors Recommended work-piece Nitrile rubber, Silicone rubber, Urethane rubber, Fluoro rubber, Conductive silicone rubber, Conductive butadiene rubber (Low resistance), Conductive NBR (Low resistance), HNBR, EPDM Holder type Fixed type Spring type Holder without cover is available. Direct mount (Fixed type or Spring type) Screwed type

Abrir o catálogo na página 2
Oval - 3

■ Model designation of Pad rubber only (Ex.) VP Size Connection type Code 2×4 X (㎜) 2 Y (㎜) 4 Screw Mount ④ .Pad type Code Type ⑤ .Pad material / Application Code N S U F SE E NE Urethane Fluoro Rubber Nitrile Silicone Conductive Conductive Butadiene Conductive NBR rubber rubber Silicone rubber rubber (Low resistance) (Low resistance) material rubber rubber Application Cardboard Semiconductors Cardboard Chemical Semiconductors General Semiconductors Plywood Taking out Plywood environment Taking out parts of Iron plate molded parts Iron plate High temp. molded parts semiconductors...

Abrir o catálogo na página 3
Oval - 4

Vacuum Pad Series Vacuum Pad Oval Series ■ Vacuum Pad dimensions ※ Weight in [ ] is the weight of Fluoro rubber.

Abrir o catálogo na página 4
Oval - 5

5 ※ Weight in [ ] is the weight of Fluoro rubber.

Abrir o catálogo na página 5
Oval - 6

Vacuum Pad Series Vacuum Pad Oval Series ※ Weight in [ ] is the weight of Fluoro rubber. ■ Table of Connection configuration code., etc for connection of pad and holder Pad Size (㎜) 2×4 3.5×7 4×10 5×10 6×10 4×20 5×20 6×20 8×20 4×30 5×30 6×30 8×30 Connection type Screw (Connection with screw) Connection configuration code

Abrir o catálogo na página 6
Oval - 7

■ Drawing of Vacuum Pad and Holder Joint Vacuum pad rubber only Pad & screw set Model code Inner lip height Connection config. code K Pad frame model code FSPH10-M69 FSPH20-M69 ■ Holder Dimensions for Vacuum Pad Oval Series Refer to the following dimensions, when producing vacuum pad holder and attach PISCO vacuum pad oval series to the holder. Pad size:2×4 3.5×7 □×10

Abrir o catálogo na página 7
Oval - 8

Vacuum Pad Series Vacuum Pad Oval Series ■ Model designation of Holder + Pad (Ex.) VP -6J ⑨ -S3 Spec. ⑧ Filter (Option) Vacuum Pad ① Holder type MD D OD Spring type / Side port MB B − Fixed type / Side port Mini Standard No cover Type MC C OC Spring type / Top port − Mini F Standard − No cover Type Spring type / Direct mount AE Screwed type / Top port Mini Standard No cover Type Mini Standard No cover Type MA A − Fixed type / Top port Mini Standard No cover Type BE Screwed type / Side port ※ Holder for Oval Pad Series ② .Pad size Size Connection type Code 2×4 X (㎜) 2 Y (㎜) 4 Screw Mount ⑦...

Abrir o catálogo na página 8
Oval - 9

④ .Pad type Code Type ⑤ .Pad material / Application Code N S U F SE E NE Urethane Fluoro Rubber Nitrile Silicone Conductive Conductive Butadiene Conductive NBR rubber rubber Silicone rubber rubber (Low resistance) (Low resistance) material rubber rubber Application Cardboard Semiconductors Cardboard Chemical Semiconductors General Semiconductors Plywood Taking out Plywood environment Taking out parts of Iron plate molded parts Iron plate High temp. molded parts semiconductors work-pieces Thin workFood-related Thin workpieces pieces Other general Food-related work-pieces Food-related Natural...

Abrir o catálogo na página 9
Oval - 10

Vacuum Pad Series Vacuum Pad Oval Series ■ Vacuum pad + Fixed type holder Dimensions VPMA Fixed type / Top port / Push-in fitting / Mini holder RoHS Compliant Copper alloy free available Unit:mm Model code Connection config. code ※ .5: Replaced with Pad rubber material code. Refer to page 1044 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N and NE are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fixing bulkh

Abrir o catálogo na página 10
Oval - 11

VPMA Fixed type / Top port / Barb fitting / Mini holder RoHS Compliant Copper alloy free available Model code Connection config. code ※ .5: Replaced with Pad rubber material code. Refer to page 1044 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N and NE are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder

Abrir o catálogo na página 11
Oval - 12

Vacuum Pad Series Vacuum Pad Oval Series VPA Fixed type / Top port / Push-in fitting / Standard holder RoHS Compliant Copper alloy free available Hex. Connection config. code H ※ .5: Replaced with Pad rubber material code. Refer to page 1044 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). -S3 spec. is available for model codes with 9 in the table above. ※ .Pad material N and NE are not suitable for use under ozone environment. ø ※ .Tightening torque of a pad holder fixing bulkhead nut is

Abrir o catálogo na página 12
Oval - 13

Fixed type / Top port / Barb fitting / Standard holder RoHS Compliant Copper alloy free available Model code Connection config. code ※ .5: Replaced with Pad rubber material code. Refer to page 1044 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N and NE are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fi

Abrir o catálogo na página 13
Oval - 14

Vacuum Pad Series Vacuum Pad Oval Series VPA Fixed type / Top port / Female thread / Standard holder RoHS Compliant Copper alloy free available Connection config. code ※ .5: Replaced with Pad rubber material code. Refer to page 1044 for details. ※ .9: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts). ※ .Pad material N and NE are not suitable for use under ozone environment. ※ .Tightening torque of a pad holder fixing bulkhead

Abrir o catálogo na página 14

Todos os catálogos e folhetos técnicos NIHON PISCO CO.

  1. CTB series

    1 Páginas

  2. FUS8 series

    3 Páginas

  3. 31 & 32 Series

    20 Páginas

  4. VP series

    106 Páginas

  5. CHA series

    8 Páginas

  6. Gripper Series

    15 Páginas

  7. SVB Series

    50 Páginas

  8. SVA series

    13 Páginas

  9. SVR series

    31 Páginas

  10. NSB series

    8 Páginas

  11. BV series

    8 Páginas

  12. HV series

    5 Páginas

  13. Plarailchain SC

    15 Páginas

  14. Plarailchain SPO

    12 Páginas

  15. Plarailchain SP

    14 Páginas

  16. HPO

    12 Páginas

  17. HPU

    12 Páginas

  18. PJN series

    15 Páginas

  19. KJNC series

    15 Páginas

  20. SSJS series

    6 Páginas

  21. Stainless SUS316

    13 Páginas

  22. UE series

    12 Páginas

  23. FB series

    1 Páginas

  24. CTA series

    1 Páginas

  25. SFTN series

    2 Páginas

  26. SET series

    1 Páginas

  27. SFT series

    14 Páginas

  28. ULF series

    12 Páginas

  29. UCQ series

    2 Páginas

  30. UQ series

    12 Páginas

  31. NB series

    12 Páginas

  32. NA series

    12 Páginas

  33. UD series

    12 Páginas

  34. UBS series

    12 Páginas

  35. UBT series

    12 Páginas

  36. UC series

    1 Páginas

  37. UB series

    12 Páginas

  38. AK/AS series

    26 Páginas

  39. NK series

    18 Páginas

  40. Brass Series

    30 Páginas

  41. V-0 series

    27 Páginas

  42. EG Series

    27 Páginas

  43. PP Fitting series

    12 Páginas

  44. PP Series

    26 Páginas

  45. AP series

    18 Páginas

  46. SL series

    16 Páginas

  47. P-SUS series

    33 Páginas

  48. NS series

    24 Páginas

  49. SSP series

    8 Páginas

  50. ATS series

    6 Páginas

  51. Air Filter

    20 Páginas

  52. SFU series

    9 Páginas

  53. JP series

    15 Páginas

  54. ET series

    11 Páginas

  55. EQ series

    19 Páginas

  56. CVLU series

    21 Páginas

  57. CV series

    24 Páginas

  58. JN series

    25 Páginas

  59. JSD series

    10 Páginas

  60. JS Low-Flow series

    17 Páginas

  61. JSC series

    13 Páginas

  62. JS series

    30 Páginas

  63. MA series

    16 Páginas

  64. RH series

    16 Páginas

  65. R series

    16 Páginas

  66. PS series

    16 Páginas

  67. L series

    41 Páginas

  68. FUS20

    7 Páginas

  69. GP series

    13 Páginas

  70. VUS12 series

    2 Páginas

  71. VUS21 series

    14 Páginas

  72. VUS8-S series

    22 Páginas

  73. JSD series

    10 Páginas

  74. JK series

    10 Páginas

  75. RVFUP series

    6 Páginas

  76. VLF series

    16 Páginas

  77. VFL series

    8 Páginas

  78. VF series

    22 Páginas

  79. ECV series

    8 Páginas

  80. VPKE series

    4 Páginas

  81. RPV06 Series

    8 Páginas

  82. VZ Series

    34 Páginas

  83. VX Series

    42 Páginas

  84. VQ Series

    4 Páginas

  85. VN Series

    40 Páginas

  86. VK series

    53 Páginas

  87. VJ Series

    34 Páginas

  88. VG series

    21 Páginas

  89. VRL series

    17 Páginas

  90. VVV series

    11 Páginas

  91. VLS series

    4 Páginas

  92. VM | VC series

    28 Páginas

  93. VY series

    24 Páginas

  94. VB series

    11 Páginas

  95. VH | VS series

    28 Páginas

  96. VPHMP series

    12 Páginas

  97. VYR series

    5 Páginas

  98. HS series

    13 Páginas

  99. HML series

    14 Páginas

  100. VRG series

    18 Páginas

  101. Dry Unit Series

    33 Páginas

  102. VLM series

    12 Páginas

  103. VSPE series

    5 Páginas

  104. VT series

    21 Páginas

  105. PB series

    13 Páginas

  106. JSG series

    17 Páginas

  107. pararel

    3 Páginas

  108. fitting

    4 Páginas

  109. BJSU series

    4 Páginas

  110. SC

    15 Páginas

  111. SPO

    12 Páginas

  112. SP

    13 Páginas

  113. RPV pump

    8 Páginas

  114. Pre-set

    6 Páginas

  115. Flange

    13 Páginas

  116. HML

    14 Páginas

  117. VYR

    5 Páginas

  118. VPLFC

    17 Páginas

  119. SVB

    172 Páginas

  120. SVR

    39 Páginas

  121. 8mm Sensor

    22 Páginas

  122. Vacuum Filter

    28 Páginas

  123. Fall Prevention

    18 Páginas

  124. Vacuum Pen

    21 Páginas

  125. Push-Rod Release

    4 Páginas

  126. cylinder

    22 Páginas

  127. FDAbellows

    6 Páginas

  128. sponge

    50 Páginas

  129. mark-free

    34 Páginas

  130. flat

    42 Páginas

  131. Ultrathin

    34 Páginas

  132. packaging bag

    13 Páginas

  133. multi-bellow

    46 Páginas

  134. bellows pad

    74 Páginas

  135. Skid proof pad

    42 Páginas

  136. soft bellow pad

    60 Páginas

  137. soft pad

    66 Páginas

  138. VRL

    17 Páginas

  139. VZ

    34 Páginas

  140. VX

    42 Páginas

  141. VVV

    11 Páginas

  142. VQ

    42 Páginas

  143. VN

    40 Páginas

  144. VLS

    4 Páginas

  145. VLM

    12 Páginas

  146. VK

    53 Páginas

  147. VJ

    34 Páginas

  148. VG

    21 Páginas

  149. Vacuum Tube

    12 Páginas

  150. Twin Coiling

    12 Páginas

  151. Tube Cutter

    12 Páginas

  152. Polyurethane Tube

    12 Páginas

  153. Nylon Tube Series

    12 Páginas

  154. Insert Ring

    12 Páginas

  155. UL series

    12 Páginas

  156. Anti-spatter Tube

    12 Páginas

  157. K series

    30 Páginas

  158. Main Block Series

    24 Páginas

  159. Connector Series

    16 Páginas

  160. Color Cap

    12 Páginas

  161. Vacduum gripper

    18 Páginas

  162. SSNC series

    13 Páginas

  163. SJSC series

    24 Páginas

  164. KJSC series

    17 Páginas

  165. Silencer Series

    13 Páginas

  166. Check Valve

    4 Páginas

  167. Parallel Gripper

    6 Páginas

  168. JSG

    17 Páginas

  169. GENERAL

    106 Páginas

  170. Ball Valve Series

    19 Páginas

  171. Hand Valve Series

    15 Páginas

  172. Change Valve

    11 Páginas

  173. SVA21 Series

    21 Páginas

  174. P Series

    71 Páginas

  175. SVA20 Series

    43 Páginas

  176. RegulatorPL031821m

    12 Páginas

  177. BJSU series

    6 Páginas

  178. NP68-01e

    17 Páginas