JK series
10Páginas

Excertos do catálogo

Tamper-Proof Family Push-In Fitting Type Flow Control Valve for Constant Flow Rate Preset / Orifice Flow Control Valve ● ● Factory Preset Actuator Speed Preset Flow Rate by an orifice restrictor No-adjustable constant flow ● Selectable from 20 types of Orifice Bore (If the selection is difficult, contact us for support.)

Abrir o catálogo na página 1

Preset / Orifice Flow Control Valve ■ Model Designation (Example) JK Preset / Orifice Flow Control Valve Inch Hex. ④ Control direction ③ Thread size inch size ③ Thread size Thread size Straight thread (Special-Made) Taper pipe thread ※Theunitofwrenchsizeisinch(thecodesuffixis“U”). 10-32UNF and M5 thread are not standard for the series. Please ask us for available models. R thread is same as BSPT ④ Control direction Code Control direction Meter-out (Exhasut) Meter-in (Supply) ■ Air from thread side is controlled. Air from ■ Air from tube side is controlled. Air from tube side is not...

Abrir o catálogo na página 2

■ Specifications Fluid medium Operating pressure range Check valve cracking pressure Operating temp. range ■ Construction (Straight: JKC) Symbol Tubing Release ring (POM) Guide ring (Nickel-plated brass) Lock-claws (Stainless steel) Elastic sleeve (NBR) Metallic body (Nickel-plated brass) Orifice Tube End Sealock - coating ■ Standard Size List Connection: Thread ⇔ Tube Type JKC Straight  10-32UNF thread and M5 thread are not as standard. Please ask us for availabilities. Detailed Safety Instructions Before “Safety Instruction Manual” and “Common Safety Instructions for Controllers” Caution...

Abrir o catálogo na página 3

※ Specify "A" for Meter-out (Exhaust) control or "B" for Meter-in (Supply) control in ④ and orifice diameter from the following table in ⑤ ※ Orifice size 0 .1mm and 0 .2mm is available only for tubing O.D. 5/32" and 4mm "L" is reference values for height dimensions after tightening the thread Ask us availability for JKC5/32-U10 - 10-32UNF thread model ※ Specify "A" for Meter-out (Exhaust) control or "B" for Meter-in (Supply) control in ④ and orifice diameter from the following table in ⑤ ※ Orifice size 0 .1mm and 0 .2mm is available only for tubing O.D. 5/32" and 4mm "L" is reference values...

Abrir o catálogo na página 4

Controller Series Flow Characteristics (reference only) [Control Flow] [Free Flow]

Abrir o catálogo na página 5

Tube O.D. Model code øD JKC4-01 □□ JKC6-01 □□ JKC6-02□□ JKC8-01 □□ JKC8-02□□ Free flow effective area Weight CAD (mm2) (g) file name ※ 1. “L” is a reference value for height dimension after tightening taper thread. ※ 2. Left □ in Model code / Replaced with ”A” for Meter-out (Exhaust), “B” for Meter-in (Supply). Right □ in Model code / Replaced with orifice bore size selected from the following table. Tube O.D. Model code øD JKL4-01 □□ JKL6-01 □□ JKL6-02 □□ JKL8-01 □□ JKL8-02 □□ Hex. Free flow effective area Weight CAD (mm2) (g) file name H 10 ※ 1. “L” is a reference value for height...

Abrir o catálogo na página 6

■ How to select orifice bore ■ Select orifice bore by the following method, when controlling cylinder speed with Speed Controller Constant Flow. ① Use the following calculation formula and find an necessary air flow rate in order to control cylinder at desired speed. (Calculation to find air flow rate) P ＋ 0.1013 D2 × L 　 Q ＝ 4.7 × 10-5 ×────×────── t 0.1013 　 Q ＝ Air flow rate (l/min(ANR)) 　 D ＝ Cylinder tube I.D.(mm) 　 L ＝ Cylinder stroke (mm) 　 t ＝ One-way stroke time (sec) 　 P ＝ Operating pressure (MPa) ② Use the chart of Flow Characteristic. Select 2 or 3 orifice bores which are closer...

Abrir o catálogo na página 7

Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Flow rate (l/min(ANR)) Free flow

Abrir o catálogo na página 8

Air flow rate (l/min(ANR)) [Chart 2.] Chart for obtaining air ﬂow rate of air cylinder 20 50 Cylinder speed (mm/sec)

Abrir o catálogo na página 9

Common Safety Instructions for Controllers Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series as well as the instructions below. Warning 1. Some products have an air direction to control. Make sure to distinguish the direction by marking on the products. Installing the product with the wrong direction may cause personal injury or property damage. 2. Avoid any load on PISCO products such as a tensile strength, twisting, bending, dropping and excessive impacts. These may cause damage to the products. 3. Locknut needs...

Abrir o catálogo na página 10

JK series 10Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos NIHON PISCO CO.

JK series
10Páginas