FUS8 series
1 / 3Páginas

Excertos do catálogo

Best suitable for suction lift verification of small work piece Small Flow Sensor FUS8 series Characteristics • Ultra-small and light weight Width: 8.5mm, Height: 24mm, Length: 41mm,Weight: 10.7g (with ø4mm push-in fitting) • A wide variety of connection method is available. The connection methods of ① ~ ④ are lined up. On top of it, various fitting combination for connection configuration are available. No. ① ② ③ ④ Connection method size Barb fitting model ø6×ø4mm Female thread model M5×0.8 • Best suitable for suction lift verification. Non-linear type sensor suitable for suction lift verification. -Suction lift verification of small work piece, which is hard to detect by pressure sensor. -Verification for which the piping is long and hard to detect by pressure sensor. -When vacuum flow is narrowed in order to secure pressure difference and the tact time to suction lift verification becomes longer. Suction Flow rate Hard to detect by small pressure gap. Clear detection is possible by flow rate gap. • Three types of installation method are available. ① Direct screw mounting ③ Sensor head direct mount -Easy installation and removal of the product -Installation on min. space is possible. • Bidirectional flow measurement type, best suitable for suction transportation, is available.　Bidirectional type enables suction lift and release verification. Thus, best suitable for suction transport application. Flow to output characteristics Flow to output characteristics 5 Suction confirmation Flow rate (ℓ/min) One-way model Vacuum break confirmation. Suction confirmation

Abrir o catálogo na página 1

Model designation of Flow sensor (Example) FUS8 (1) Model designation of Cable FUS8 (1) FUS8: Flow sensor (Non-linear type) (2) Output type (1) FUS8: Flow sensor (Non-linear type) (2) Cable (4) Flow rate range (Full scale flow rate) Model code of Holder (5) In-side port (6) Out-side port Code (1) Holder for flow sensor (Non-linear type) Push-in fitting Barb fitting female thread sensor head unit *Flow rate of ø1.8mm is max. 4l/min. *Flow rate of ø2 mm is max. 5l/min. *Size of In-side/Out-side port is selectable from the above list. (7) Cable 3: With cable (3 cores and 3 m) No code: Without...

Abrir o catálogo na página 2

Operating conditions Model code FUS8-A-R005 FUS8-A-R010 FUS8-A-R050 FUS8-A-R100 FUS8-A-F005 FUS8-A-F010 FUS8-A-F050 FUS8-A-F100 Description Flow rate range -0.5 ~ 0.5l/min -1 ~ 1l/min -5 ~ 5l/min -10 ~ 10l/min 0 ~ 0.5l/min 0 ~ 1l/min 0 ~ 5l/min 0 ~ 10l/min Fluid medium Clean air (JIS B8392-1, 1.1.1~1.6.2), Nitrogen Operating pressure range -0.09 ~ 0.2MPa (-26.58 ~ 59.06in.Hg) Proof pressure 0.3MPa (-88.59in.Hg) Operating ambient temp. & hum. 32 ~ 122°F (0 ~ 50°C) Max.80%RH Fluid medium temp. 32 ~ 122°F (0 ~ 50°C) (No dew condensation) Temperature range at storing -4 ~ 140°F (-20 ~60°C) (No...

Abrir o catálogo na página 3

FUS8 series 1 / 3Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos NIHON PISCO CO.

FUS8 series
1 / 3Páginas