
Grupo: 株式会社日本ピスコ

Excertos do catálogo

TUBE MAKE-TO-ORDER PRODUCTS Tube for Environment Prone to Corrosion Fluororesin (PFA) Tube Chemical Industry Medical Industry Medicine Industry Food Industry in Medicine, Heat and Weather Resistance. for Medical, Chemical, Food and Medicine Industries. ● Advanced Smoothness of Tube Inner Surface, Transparency and High Purity. Fluororesin / Polyamide Tube Clean Room Tube Anti-Spatter Tube Anti-Stalic Tube Tube Binder Tube cutter Insert Ring Tube R
Abrir o catálogo na página 1
Tube Series Fluororesin (PFA) Tube ■ Model Designation (Example) SFT Fluororesin (PFA) Tube Tube color: C (Transparent) only ② Tube length inch size ② Tube length Code 629 Standard Tube Multi-core Tube Coiling Tube Twin Coiling Tube Fluororesin / Polyamide Tube ■ Specifications Fluid medium Max. operating pressure (at 20℃ 65%RH) Max. vacuum Operating temp. range Warning ※ 1. Surge pressure must be controlled lower than max. operating pressure when using water or liquid as a fluid medium. ※ 2. Tap water can be used. Consult with PISCO for using other kind of water. ※ 3. Be sure to place...
Abrir o catálogo na página 2
■ Burst Pressure Curve (Reference value) 10 9 MAKE-TO-ORDER PRODUCTS Detailed Safety Instructions Before using PISCO products, be sure to read Safety Instructions and Safety Instruction Manual on page 23 to 27 and Common Safety Instructions for Tubes on page 593 to 594. ■ Related Products Insert Ring……P.668 Tube Fitting Stainless SUS316 Series………P.108 Tube Fitting Stainless SUS316 Compression Fitting Series………P.120 Tube Fitting Chemical Series…………P.168 Tube Fitting PP Series………P.178 Speed Controller PP Series………P.412 Throttle (Needle) Valve Stainless SUS316………P.460 Throttle (Needle) Valve...
Abrir o catálogo na página 3
Tube Series Fluororesin (PFA) Tube SFT Fluororesin (PFA) Tube compliant Model code Tube length Min. Bending Radius Min. Installation Radius (mm) (mm) (m) 5・20・50・100 ※ . □ in model code: Replaced with Tube length
Abrir o catálogo na página 4
※ . Contact us for further information about special tube size above. MAKE-TO-ORDER PRODUCTS Fluororesin / Polyamide Tube Cl
Abrir o catálogo na página 5
Tube Series ■ Chemical resistance (SFT tube can be used with the following chemicals at operating temperature 100℃ ) ■ Acid 50% acetic acid Glacial acetic acid Benzoic acid Citric acid Formic acid 50% hydrochloric acid 70% hydrofluoric acid 10% nitric acid 50% nitric acid 100% phenol Phthalic acid 30% phosphoric acid 85% sulfuric acid 98% sulfuric acid Fuming sulfuric acid Benzenesulfonic acid Chlorosulfonic acid 50% chromic acid 10% hydrochloric acid 35% hydrochloric acid 30% hydrofluoric acid Fuming nitric acid Oxalic acid 10% phenol 85% phosphoric acid Succinic acid 50% sulfuric acid 10%...
Abrir o catálogo na página 6
Safety Instructions SAFETY Instructions This safety instructions aim to prevent personal injury and damage to properties by requiring proper use of PISCO products. Be certain to follow ISO 4414 and JIS B 8370 ISO 4414Pneumatic fluid power…Recomendations for the application of equipment to transmission and control systems. JIS B 8370General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous...
Abrir o catálogo na página 7
http://www.pisco.co.jp http://www.pisco.co.jp Disclaimer 1. PISCO does not take any responsibility for any incidental or indirect loss, such as production line stop, interruption of business, loss of benefits, personal injury, etc., caused by any failure on use or application of PISCO products. 2. PISCO does not take any responsibility for any loss caused by natural disasters, fires not related to PISCO products, acts by third parties, and intentional or accidental damages of PISCO products due to incorrect usage. 3. PISCO does not take any responsibility for any loss caused by improper...
Abrir o catálogo na página 8
Safety Instructions SAFETY INSTRUCTION MANUAL PISCO products are designed and manufactured for use in general industrial machines. Be sure to read and follow the instructions below. 1. Do not use PISCO products for the following applications. ① Equipment used for maintaining / handling human life and body. ② Equipment used for moving / transporting human. ③ Equipment specifically used for safety purposes. 1. Do not use PISCO products under the following conditions. ① Beyond the specifications or conditions stated in the catalog, or the instructions. ② Under the direct sunlight or outdoors....
Abrir o catálogo na página 9
http://www.pisco.co.jp http://www.pisco.co.jp 1. Remove dusts or drain before piping. They may get into the peripheral machine / facilities and cause malfunction. 2. When inserting an ultra-soft tube into push-in fitting, make sure to place an Insert Ring into the tube edge. There is a risk of causing the escape of tube and a fluid leakage without using an Insert Ring. 3. The product incorporating NBR as seal rubber material has a risk of malfunction caused by ozone crack. Ozone exists in high concentrations in static elimination air, clean-room, and near the high-voltage motors, etc. As a...
Abrir o catálogo na página 10
Safety Instructions 7. Instructions for Tube Disconnection ① Make sure there is no air pressure inside of the tube, before disconnecting it. ② Push the release-ring of the push-in fitting evenly and deeply enough to pull out the tube toward oneself. By insufficient pushing of the releasering, the tube may not be pulled out or damaged by scratch, and tube shavings may remain inside of the fitting, which may cause the leakage later. 8. Instructions for Installing a fitting ① When installing a fitting, use proper tools to tighten a hexagonal-column or an inner hexagonal socket. When inserting...
Abrir o catálogo na página 11
Tube Series Common Safety Instructions for Tubes Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series as well as the instructions below. Warning 1. Avoid any load on Tubes such as tensile strength, twisting and bending. These may cause the crush, burst and escape of Tubes. 2. Protect Tubes from scratches caused by snagging or kinking. It may cause the burst of Tubes. 3. The burst pressure of Tubes drops as temperature rises. Read the operating pressure in the catalog well, and apply safety factor. 4. The minimum...
Abrir o catálogo na página 12Todos os catálogos e folhetos técnicos NIHON PISCO CO.
-
CTB series
1 Páginas
-
FUS8 series
3 Páginas
-
31 & 32 Series
20 Páginas
-
Small Pressure Sensor11・12- series
25 Páginas
-
Vacuum Pad Soft Series
86 Páginas
-
VP series
106 Páginas
-
CHA series
8 Páginas
-
Gripper Series
15 Páginas
-
SVB Series
50 Páginas
-
SVA series
13 Páginas
-
SVR series
31 Páginas
-
NSB series
8 Páginas
-
Ball Valve SUS304 series
8 Páginas
-
BV series
8 Páginas
-
HV series
5 Páginas
-
Cable clamp & Dividing sheet
8 Páginas
-
Plarailchain SC
15 Páginas
-
Plarailchain SPO
12 Páginas
-
Plarailchain SP
14 Páginas
-
HPO
12 Páginas
-
HPU
12 Páginas
-
PJN series
15 Páginas
-
KJNC series
15 Páginas
-
Speed Controller Anti-spatter Series
15 Páginas
-
SSJS series
6 Páginas
-
Flow Control Valve PP Series
12 Páginas
-
Stainless SUS316
13 Páginas
-
UE series
12 Páginas
-
FB series
1 Páginas
-
CTA series
1 Páginas
-
SFTN series
2 Páginas
-
SET series
1 Páginas
-
SFT series
14 Páginas
-
ULF series
12 Páginas
-
UCQ series
2 Páginas
-
UQ series
12 Páginas
-
NB series
12 Páginas
-
NA series
12 Páginas
-
UD series
12 Páginas
-
UBS series
12 Páginas
-
UBT series
12 Páginas
-
UC series
1 Páginas
-
UB series
12 Páginas
-
AK/AS series
26 Páginas
-
NK series
18 Páginas
-
Brass Series
30 Páginas
-
V-0 series
27 Páginas
-
EG Series
27 Páginas
-
PP Fitting series
12 Páginas
-
PP Series
26 Páginas
-
AP series
18 Páginas
-
SL series
16 Páginas
-
P-SUS series
33 Páginas
-
NS series
24 Páginas
-
SSP series
8 Páginas
-
ATS series
6 Páginas
-
Air Filter
20 Páginas
-
Combination Unit Series
25 Páginas
-
SFU series
9 Páginas
-
JP series
15 Páginas
-
ET series
11 Páginas
-
EQ series
19 Páginas
-
CVLU series
21 Páginas
-
CV series
24 Páginas
-
JN series
25 Páginas
-
Speed Controller Constant Flow
15 Páginas
-
JSD series
10 Páginas
-
JS Low-Flow series
17 Páginas
-
JSC series
13 Páginas
-
JS series
30 Páginas
-
Miniature Pressure Regulator
12 Páginas
-
MA series
16 Páginas
-
RH series
16 Páginas
-
R series
16 Páginas
-
PS series
16 Páginas
-
L series
41 Páginas
-
FUS20
7 Páginas
-
Small Flow Sensor FUS8 Sries
3 Páginas
-
GP series
13 Páginas
-
VUS-32. SEU-32 Series
1 Páginas
-
LED Display for 11 and 12 series
1 Páginas
-
Small Pressure Sensor 11-series
24 Páginas
-
VUS12 series
2 Páginas
-
VUS21 series
14 Páginas
-
VUS8-S series
22 Páginas
-
JSD series
10 Páginas
-
Orifice Fitting Series
6 Páginas
-
JK series
10 Páginas
-
RVFUP series
6 Páginas
-
VLF series
16 Páginas
-
VFL series
8 Páginas
-
VF series
22 Páginas
-
ECV series
8 Páginas
-
VPLFC, VPLFD series
17 Páginas
-
VPKE series
4 Páginas
-
RPV06 Series
8 Páginas
-
VZ Series
34 Páginas
-
VX Series
42 Páginas
-
VQ Series
4 Páginas
-
VN Series
40 Páginas
-
VK series
53 Páginas
-
VJ Series
34 Páginas
-
VG series
21 Páginas
-
VRL series
17 Páginas
-
VVV series
11 Páginas
-
VLS series
4 Páginas
-
VM | VC series
28 Páginas
-
VY series
24 Páginas
-
VB series
11 Páginas
-
VH | VS series
28 Páginas
-
VPHMP series
12 Páginas
-
VYR series
5 Páginas
-
HS series
13 Páginas
-
HML series
14 Páginas
-
VRG series
18 Páginas
-
Dry Unit Series
33 Páginas
-
Fiber Membrane Air Dryer
12 Páginas
-
VLM series
12 Páginas
-
VSPE series
5 Páginas
-
VT series
21 Páginas
-
PB series
13 Páginas
-
JSG series
17 Páginas
-
pararel
3 Páginas
-
fitting
4 Páginas
-
BJSU series
4 Páginas
-
SC
15 Páginas
-
SPO
12 Páginas
-
SP
13 Páginas
-
RPV pump
8 Páginas
-
Pre-set
6 Páginas
-
Stainless Steel Ball Valve
8 Páginas
-
SUS316 Flow Control Valve
6 Páginas
-
Flange
13 Páginas
-
HML
14 Páginas
-
End of Arm Vacuum Gripper
12 Páginas
-
VYR
5 Páginas
-
EOAT VRG | VMG series
18 Páginas
-
VPLFC
17 Páginas
-
SVB
172 Páginas
-
SVR
39 Páginas
-
8mm Sensor
22 Páginas
-
Vacuum Filter
28 Páginas
-
High flow vacuum filter (VFL)
8 Páginas
-
Fall Prevention
18 Páginas
-
Vacuum Pen
21 Páginas
-
Push-Rod Release
4 Páginas
-
cylinder
22 Páginas
-
FDAbellows
6 Páginas
-
Oval
80 Páginas
-
sponge
50 Páginas
-
mark-free
34 Páginas
-
flat
42 Páginas
-
Ultrathin
34 Páginas
-
packaging bag
13 Páginas
-
multi-bellow
46 Páginas
-
bellows pad
74 Páginas
-
Skid proof pad
42 Páginas
-
soft bellow pad
60 Páginas
-
soft pad
66 Páginas
-
VRL
17 Páginas
-
VH VS VC VUM VU VY VB
336 Páginas
-
VZ
34 Páginas
-
VX
42 Páginas
-
VVV
11 Páginas
-
VQ
42 Páginas
-
VN
40 Páginas
-
VLS
4 Páginas
-
VLM
12 Páginas
-
VK
53 Páginas
-
VJ
34 Páginas
-
VG
21 Páginas
-
Vacuum Tube
12 Páginas
-
Twin Coiling
12 Páginas
-
Tube Cutter
12 Páginas
-
Polyurethane Tube
12 Páginas
-
Polyurethane Tube Clean-Room Package
12 Páginas
-
Nylon Tube Series
12 Páginas
-
Multi-core Planar Tube
12 Páginas
-
Low-Friction Polyurethane Tube
12 Páginas
-
Insert Ring
12 Páginas
-
UL series
12 Páginas
-
Anti-spatter Tube
12 Páginas
-
Tube Fitting Stainless SUS304 Series
33 Páginas
-
Tube Fitting PP Series
26 Páginas
-
Tube Fitting Mini Series
41 Páginas
-
Tube Fitting Chemical Series
18 Páginas
-
K series
30 Páginas
-
Stop Fitting Series
16 Páginas
-
Rotary Joint Series
16 Páginas
-
New_Fitting Stainless SUS316 Series
8 Páginas
-
Multi-Circuit Rotary Block
12 Páginas
-
Minimal Fitting Series
20 Páginas
-
Main Block Series
24 Páginas
-
Light Coupling Series
24 Páginas
-
High Rotary Joint Series
16 Páginas
-
Connector Series
16 Páginas
-
Color Cap
12 Páginas
-
Coiling Tube with Twist-Proof Fitting
12 Páginas
-
Brass Compression Fitting Series
18 Páginas
-
2-Circuit Junction Block Series
16 Páginas
-
Vacuum EOAT Kit HML
14 Páginas
-
Vacduum gripper
18 Páginas
-
Mounting Flange for EOAT.pdf
13 Páginas
-
Throttle (Needle) Valve Standard Serie
28 Páginas
-
SSNC series
13 Páginas
-
Throttle (Needle) Valve PP Series
15 Páginas
-
Throttle (Needle) Valve Brass Series
15 Páginas
-
SJSC series
24 Páginas
-
Speed Controller Series
32 Páginas
-
Speed Controller PP Series
17 Páginas
-
Speed Controller Low Flow
17 Páginas
-
Speed Controller High Flow
13 Páginas
-
Speed Controller Brass Series
15 Páginas
-
KJSC series
17 Páginas
-
Silencer Series
13 Páginas
-
Quick Exhaust Valve Series
19 Páginas
-
Pressure Gauge Series
13 Páginas
-
Miniture quick-exhaust
17 Páginas
-
Fixed Orifice Joint Series
22 Páginas
-
Exhaust Throttle (Needle) Valve ET
11 Páginas
-
Check Valve
4 Páginas
-
SUS304_Ball Valve Series
8 Páginas
-
Fiber Membrane Filter Type Air Dryer
21 Páginas
-
Parallel Gripper
6 Páginas
-
JSG
17 Páginas
-
GENERAL
106 Páginas
-
Mechanical Valve Series
19 Páginas
-
Ball Valve Series
19 Páginas
-
Stainless Steel ball valve
6 Páginas
-
Hand Valve Series
15 Páginas
-
Change Valve
11 Páginas
-
SVA21 Series
21 Páginas
-
P Series
71 Páginas
-
SVA20 Series
43 Páginas
-
RegulatorPL031821m
12 Páginas
-
BJSU series
6 Páginas
-
NP68-01e
17 Páginas