

Excertos do catálogo

SAMPLERS ECS 80 SERIES ECS 40 SERIES
Abrir o catálogo na página 1
The pneumatic autosampler PN150 enables you to overlay up to three carousels for a total of 147 samples simultaneously loaded. A line of compressed air drives the movement of the piston that drops the capsule within the combustion reactor. Before dropping into the reactor the sample dwells in a conditioning chamber where a stream of helium ensures the elimination of atmospheric nitrogen introduced during loading. Once dropped in the reactor, the next sample is automatically introduced into the conditioning chamber. The autosampler sample holes are 11.5 mm in diameter. They can, therefore,...
Abrir o catálogo na página 2
Electronic Autosampler "Zero Blank" The autosampler movements are electronically controlled by a micro stepper motor. There are three carousels available with respectively 32, 50 and100 positions. The "Zero Blank" is completely sealed and a "purge" system ensures the elimination of any "nitrogen residual" which makes it particularly suitable for use in the analysis of isotopes. Isolation valve: optional item for the Autosampler "Zero Blank". It allows to minimize system changes during sample loading. Equipped with a "purge" line separate from the line of the “carrier” gas, the isolation...
Abrir o catálogo na página 3
Manual Sampler The manual sampler is the right solution when a low number of samples have to be analyzed, combining efficiency and good stability to low costs.
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos NC Technologies
-
Application Note: CHNS in Fuels
2 Páginas
-
ECS8024
11 Páginas
-
ECS8022
11 Páginas
-
EA ID MICRO
16 Páginas
-
EA IRMS created by NC Technologies
16 Páginas
-
ECS 4024 created by NC Technologies
5 Páginas
-
ECS 4010 created by NC Technologies
5 Páginas
-
ECS 8060 created by NC Technologies
4 Páginas
-
ECS 8040 created by NC Technologies
11 Páginas
-
ECS 8020 created by NC Technologies
11 Páginas