Catálogos >
Nanjing AH Electronic Science and Technology Co., Ltd. >
Linear Hall sensor AH3511

Linear Hall sensor AH3511
1 / 8Páginas

Excertos do catálogo

Linear Hall Sensor AH3511

Linear Hall Sensor AH3511 Features  Rated working voltage 4.5 V ~ 6 V,  Operating temperature range: -40℃ ~ 125℃;  Rail to Rail voltage output, Rated output current : 6 mA,  Variety of package forms and outer packings for your choice.  No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;  Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements 2/8 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE ＆ TECHNOLOGY CO.,LTD ADD：南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road,...

Abrir o catálogo na página 2

Linear Hall Sensor AH3511 The sensor will pass linear area /nonlinear area/ saturation area during the magnetic induction increases. When there is no magnetic field that applies in sensor (B=0), when the output voltage of sensor is only half of Vcc (Vcc/2); when “N” pole faces mark surface of sensor, and be closed to it gradualy (B→-∞）,the output voltage begins to decrease, and the voltage doesn’t reduce with the increased magnetic field; When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor gradualy （B→+∞）, the output voltage of sensor begins to increase,...

Abrir o catálogo na página 3

Linear Hall Sensor AH3511 ◆Block Diagram AH3511 is a kind of analog signal output Hall IC, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage. 4/8 南京艾驰电子科技有限公司...

Abrir o catálogo na página 4

Linear Hall Sensor AH3511 ◆Limit Parameter Parameter Storage Temp Supply Voltage Magnetic Induction ◆ Electrostatic Grade Under human being mode, the Electrostatic compression is large than ± 6kV. 5/8 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE ＆ TECHNOLOGY CO.,LTD ADD：南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL：86-25-8467037

Abrir o catálogo na página 5

Linear Hall Sensor AH3511 Note 1: Unit is mT, 1mT=10Gs Note 2: When the “S”Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B > 0. 6L8 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD 33 ^SII^fiff£III B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 E-mail : nianrong@ahest.com Web: www.ahest.com

Abrir o catálogo na página 6

Linear Hall Sensor AH3511 7/8 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE ＆ TECHNOLOGY CO.,LTD ADD：南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL

Abrir o catálogo na página 7

Linear Hall Sensor AH3511 Note: in the package outline figure, Pin 1 is Vcc, Pin2 is GND, Pin 3 is output terminal. Mark Mark “XX”or “AHXX” are abbreviation form of parts No., the second line “XXXX” means product lot No. 8/8 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE ＆ TECHNOLOGY CO.,LTD ADD：南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TE

Abrir o catálogo na página 8