

Excertos do catálogo

Latch Type Hall sensor AH3012
Abrir o catálogo na página 1
Latch Type Hall Sensor AH3012 ◆ Features Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -55℃ ~ 150℃; Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA Switch response time is about 1μs, the operating frequency DC ~ 100 kHz; Small temperature drift between operating point and release point; No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements...
Abrir o catálogo na página 2
Latch Type Hall Sensor AH3012 Pm-iw ♦ Outline When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor( B>Bop ),the sensor outputs low level; When the “N” pole faces the mark surface and is closed to sensor ( B<Brp ) ,the sensor outputs high level. When the magnet is far away from the sensor (B=0), the output status of the sensor is latched and keeps constant. In order to change the output status, the applied magnetic field must be opposite polarity. The magnet and electric transfer characteristic curve of AH3012 is shown as the figure: 319 NANJING AH...
Abrir o catálogo na página 3
Latch Type Hall Sensor AH3012 Hall sensor AH3012 is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open collector output driver circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged...
Abrir o catálogo na página 4
Latch Type Hall Sensor AH3012 Pm-iw Parameter Symbol Min. Max. Unit Storage Temp. Supply Voltage Output Cut-off Voltage Under human being mode, the Electrostatic compression is large than ±6kV. 513 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD : 33 B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL : 86-25-84609021 FAX : 86-25-84670370 E-mail : nianrong@ahest.com Web: www.ahest.com
Abrir o catálogo na página 5
Latch Type Hall Sensor AH3012 Pm-iw Parameter Symbol Min. Max. Unit Output Rise Edge Time Output Fall Edge Time 613 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD : 33 B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL : 86-25-84609021 FAX : 86-25-84670370 E-mail : nianrong@ahest.com Web: www.ahest.com
Abrir o catálogo na página 6
Latch Type Hall Sensor AH3012 Test Condition : Vcci = Vcc2 =24V , Io = 50mA Hysteresis I Operate point -Release Point I Note 1: Unit is mt, 1mt=10Gs Note 2: When the “S”Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B > 0. H9 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD : 33 B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL : 86-25-84609021 FAX : 86-25-84670370 E-mail : nianrong@ahest.com Web: www.ahest.com
Abrir o catálogo na página 7
Latch Type Hall Sensor AH3012 SOT-89 Package figure ( Unit: mm) 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD:南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL:86-25
Abrir o catálogo na página 8
Latch Type Hall Sensor AH3012 Note: In the above package outline figure, Pin 1: Vcc, Pin2: GND, Pin 3: Output terminal. Mark Mark ―XX‖ or ―AHXX‖ are abbreviation form of the parts No., M type: It’s face to the product’s mark, the 2 pins are downward, from left and as per 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD:南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 T
Abrir o catálogo na página 9Todos os catálogos e folhetos técnicos Nanjing AH Electronic Science and Technology Co.
-
WG Wiegand Sensor Selection Guide
1 Páginas
-
AH Hall Sensor Selection Guide
6 Páginas
-
Gear Speed Sensor AH3194
6 Páginas
-
Dual Output Bipolar Hall IC AH4059
7 Páginas
-
Dual Output Unipolar Hall IC AH4158
7 Páginas
-
Bipolar Hall sensor AH3041N (Latch Type)
10 Páginas
-
WG113A Wiegand Sensor
2 Páginas
-
Zero Power Consumption Sensor WG214
2 Páginas
-
Zero power consumption sensor WG112
2 Páginas
-
Linear Hall sensor AH3503
8 Páginas
-
Linear Hall sensor AH3513
8 Páginas
-
Linear Hall sensor AH3515
8 Páginas
-
Linear Hall sensor AH3517
8 Páginas
-
Linear Hall sensor AH3519
8 Páginas
-
Unipolar Hall Sensor AH3131
10 Páginas
-
Unipolar Hall Sensor AH3132
10 Páginas
-
Unipolar Hall Sensor AH3133
10 Páginas
-
Unipolar Hall Sensor AH3134R
10 Páginas
-
Unipolar Hall Sensor AH3134
10 Páginas
-
Unipolar Hall Sensor AH3144
10 Páginas
-
Unipolar Hall Sensor AH3145
10 Páginas
-
Bipolar Hall sensor AH3031R (Latch Type)
10 Páginas
-
Bipolar Hall sensor AH3031 (Latch Type)
10 Páginas
-
Bipolar Hall sensor AH3041 (Latch Type)
10 Páginas
-
Bipolar Hall sensor AH3051 (Latch Type)
10 Páginas
-
Bipolar Hall sensor AH3075 (Latch Type)
10 Páginas
-
Zero Power consumption Sensor WG311
6 Páginas
-
AH Hall sensors in E-Bike
1 Páginas
-
Unipolar Hall Sensor AH441
8 Páginas
-
Unipolar Hall Sensor AH443
9 Páginas
-
Unipolar Hall Sensor AH543
9 Páginas
-
Unipolar Hall Sensor AH3141
9 Páginas
-
Unipolar Hall Sensor AH3142
9 Páginas
-
Linear Hall sensor AH49E
8 Páginas
-
Linear Hall sensor AH496B
8 Páginas
-
Linear Hall sensor AH3505
8 Páginas
-
Linear Hall sensor AH3511
8 Páginas
-
Linear Hall sensor AH3509
8 Páginas
-
Linear Hall sensor AH3507
8 Páginas