Catálogos >
MOUVEX >
H-FLO Series_flyers

H-FLO Series_flyers
1 / 2Páginas

Excertos do catálogo

Product Recovery Equals Big Savings Now is the time to install Mouvex Seal-less Eccentric Disc Pumps to minimize product waste and dramatically improve production yield. Typical Transfer or Fill Line Where Product Losses Occur Suction Line Loss Discharge Line Loss H-FLO Series Eccentric Disc Pump Calculate Your Savings Suction and Discharge Line Losses Volume Gallon/ Foot Liters/ Meter with Mouvex’s product recovery capabilities on both suction (self priming) and discharge (compressor effect) capability: Estimated Product Cost* per gallon or liter = ________ * Ideally to include sale value and disposal cost Inlet / Suction Line Discharge Line Length of Inlet Tube Length of Outlet Tube Volume (Multiply from Table 1) Volume (Multiply from Table 1) Cost (Volume x % x Cost/Unit) *Typical recovery on suction is 90-98%+ Cost (Volume x % x Cost/Unit) *Typical recovery on discharge 50%-90%+ ______ / time x ______ times = €/$ ______ / year year P S G D OV ER. C OM / M OU V E

Abrir o catálogo na página 1

Additional Savings Eccentric Disc Pumps Mouvex Principle Two Sets of Double or Single Mechanical Seals Abrasive Wear Parts Abrasive Wear Parts Also External Circumferential Piston (ECP) Pumps Lobe & ECP Pumps Seal Replacement Costs: ___ times per year x ____ /seal set = ________ (typical 800-1.700 € / USD $1,000-$2000+ per set) Mouvex seal-less design will assist with difficult to seal applications Seal Water Flush Costs: ___ volume/hour x €/$ ____ /volume x ___ hours/year = ________ Mouvex seal-less design does not require/use water or other flush (volume is liters or gallons) Pump Rebuild...

Abrir o catálogo na página 2