CONV485E
1 / 3Páginas

CONV485E CONV485E/M RS-485 TO ETHERNET TCP/IP CONVERTER 10BaseT ETHERNET port RS-485 port (2400 bps to 115,2 kbps) 2 modes of operation: Client i Server 2 protocols: “Transparent” and Modbus TCP ↔ RTU Support of up to 6 clients 5 LEDs for converter operation Simple configuration through web browser 2 power supply versions: 24 V DC/AC, 5 VDC 2 case versions: plastic or metal Can be mounted on TS-35 rail APPLICATIONS: Industrial automation, measurement and control systems, measurement laboratories Data transfer between computer system (controller) and device with RS-485 serial port through computer LAN network or industrial Ethernet network CONV485E is modern, simple converter allows to connect devices with RS-485 serial bus to industrial or LAN network. On RS-485 side may be connected up to 32 devices up to 1200m line length and on Ethernet port side converter can serve up to 6 clients. Converter configuration have to be make through standard web browser running on PC computer. Depending of version, converter should be supply from 24 V DC/AC transformer or from 5 V DC power supply feeder. Converter has two case versions: ABS material (CONV485E), metal (CONV485E/M). Converter is dedicated to work inside buildings or In control cabinets. Version with locking clip can be mounted on DIN rail.

CLIENT MODE CONV485E can operate in two modes of operation: Client – the converter operates as a TCP/IP client, opens the connection to TCP/IP server; enables data exchange between master systems operating in RS-485 networks and devices equipped with an Ethernet port. Server – the converter operates as a TCP/IP server; enables data exchange between master systems operating in RS-485 networks and devices equipped with an Ethernet port. PROTOCOLS The converter can operate in two protocols: “Transparent” – the converter transmits the receives string of characters between a LAN network and an...

TECHNICAL DATA ETHERNET INTERFACE Interface: Supported protocols: Data buffer: Number of simultaneous open connections Socket: LED diodes: 10BaseT Ethernet TCP, ICMP (ping), DHCP server, http server 1024 B Up to 6 RJ45 - standard version M-12 (D-coding) – metal casing version 2, internal in RJ45 socket – standard version None - metal casing version RS-485 SERIAL INTERFACE Baud rate: Data frame: Parity control: Data buffer: Signals on terminal: Maximum load: Line terminator: Minimum impedance for data transmission line: Maximal line length: Maximal voltage on terminals A(+) and B(-) Minimal...