Series 200
1 / 18Páginas

Direct solenoid and solenoid pilot operated valvesSeries 200 individual mounting Series inline Manual operator Valve spring SERIES FEATURES • The patented MACSOLENOID® with its non-burn out feature on AC service. • Six valve functions with one Inline valve and four valve functions with one Manifold valve. • A triple rated coil for 120/60, 1 10/50 or 24 VDC (6 Watt). • Inline & add-a-unit manifold capability. • Use on lube or non-lube service. • Extremely rapid response and cycle rate. • Various types of manual operators and electrical enclosures. • Extremely long service life. • Optional low wattage DC solenoids down to 1 watt. Consult "Precautions" page 364 before use, installation or service of MAC Valves

APPLICATION CONVERSION PROCEDURE: INDIVIDUAL MODELS The balanced poppet design facilitates using the same valve for 6 functions with any port being connected to vacuum, pressure or plugged. Piping is shown in the chart below. MANIFOLD MODELS The interchangeable function plate between the valve body and base permits selection for 2- or 3-way, Normally Closed or Normally Open operation, instead of through piping as shown below in the Inlines. On 3-way applications, one function plate is used for both N.C. and N.O. When "3-C" is visible on the plate, the function will be N.C. When "3-O" is...

Port size Individual mounting OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. Burn-out proof solenoid on AC service. SOLENOID OPERATOR Square connector JC Square connector with light * Other options available, see page 357. Notes: CHANGING FROM NORMALLY CLOSED TO NORMALLY OPEN Individual inline valves can be changed from normally closed to normally open by connecting the inlet to port 3 instead of port...

TECHNICAL DATA Compressed air, vacuum, inert gases Vacuum to 150 PSI Not required, if used select a medium aniline 40 p point lubricant (between 1 80°F and 210°F) General purpose class A, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory - Inrush : 33 VA Holding : 1 9.7 VA = 1 to 24 W 24 VDC (8.5 W) Energize : 15 ms De-energize : 5 ms Spare parts : •-Solenoid operator (power > 6 W) : D4-XXAAB, cover mounting screws 32222 and seal B5-6001. Options : • BSPP threads. Dimensions shown are metric (mm) Consult "Precautions" page 364 before use, installation...

Direct solenoid and solenoid pilot operated valves Series 200 Function Port size Flow [Max] Individual mounting Series OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Burn-out proof solenoid on AC service. SOLENOID OPERATOR v XX Notes: The special version of the 200 Series designed for hazardous locations has been approved by CSA for Class I, Groups B, C & G. Maximum rated fluid and ambient temperature is 40°C; maximum pressure is...

Series 200 technical data Compressed air, vacuum, inert gases Pressure range : Not required, if used select a medium aniline point lubricant (between 180°F and 210°F) Temperature range : Leak rate : General purpose class A, continuous duty, encapsulated Voltage range : NEMA 7, NEMA 9; Class I Groups B, C & D; Class II Groups E, F & G. •‑Solenoid operator (power ≥ 6 W) : D4-XXAAB. • Adapter plate ass’y. : A3-0506. • BSPP threads. Dimensions shown are metric (mm) Consult “Precautions” page 364 before use, installation or

Direct solenoid and solenoid pilot operated valves Series 200 Function Port size Flow [Max] Manifold mounting 3/2 NO-NC, 2/2 NO-NC 1/8" - 1/4" 0.5 C sub-base non "plug-in" OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. Burn-out proof solenoid on AC service. JC Square connector with light * Other options available, see page 357. End plate kit required (Port size : 1/4") : A2-5003-01. CHANGING FROM...

TECHNICAL DATA Compressed air, vacuum, inert gases Vacuum to 150 PSI Not required, if used select a medium aniline 40 p point lubricant (between 1 80°F and 210°F) General purpose class A, continuous duty, encapsulated -15% to +10% of nominal voltage Consult factory - Inrush : 33 VA Holding : 1 9.7 VA = 1 to 24 W 24 VDC (8.5 W) Energize : 15 ms De-energize : 5 ms Spare parts : •-Solenoid operator (power > 6 W) : D4-XXAAB, cover mounting screws 32222 and seal B5-6001. • Function plate : A2-7005. • Seal between bases : B5-5010. • Tie-rod (x2) : B4-9004. • BSPP threads. • Explosion-proof...

Direct solenoid and solenoid pilot operated valves Series 200 Function Port size Flow [Max] Manifold mounting Series OPERATIONAL BENEFITS 1. Balanced poppet, immune to variations of pressure. 2. Short stroke with high flow. 3. The patented solenoid develops high shifting forces. 4. Powerful return spring. 5. Manual operator standard on all valves. 6. Burn-out proof solenoid on AC service. 7. Individual pressure control to each cylinder port. Valve less base 1/4" base NPTF 252B-XXYZZ SOLENOID OPERATOR Square connector JC Square connector with light * Other options available, see...

Series 200 technical data Compressed air, vacuum, inert gases Pressure range : Not required, if used select a medium aniline point lubricant (between 180°F and 210°F) Temperature range : Leak rate : General purpose class A, continuous duty, encapsulated Voltage range : Consult factory •‑Solenoid operator (power ≥ 6 W) : D4-XXAAB, cover mounting screws 32222 and seal B5-6001. • Function plate : A2-7005. • Seal between bases (x2) : 17016-01. • Tie-rod (x2) : B4-9004. • Pressure regulator : PR02A-A0AA. • BSPP threads. • Explosion-proof model. • Isolation of inlet and/or exhaust. • Mod. PR80...