Catálogos >
Luxsolar >
PERIMETER LIGHT - TLOF INSET TLOF-LXS-INSET

PERIMETER LIGHT - TLOF INSET TLOF-LXS-INSET
1 / 2Páginas

Excertos do catálogo

PERIMETER LIGHT - TLOF INSET TLOF-LXS-INSET - 1

Protective tempered glass cover Anodized aluminium shallow base 5" Defines the perimeter of TLOF. As it is built-in, it requires the construction of a well in the flooring of the surface. Suitable for both ground and elevated platforms. ■— Steady green light ■— Lifetime higher than 10 years — Low consumption — Stabilized light — Compact and light structure — Simple installation — No RF radiations INSTALLATION MAPS LEGEND - O TLOF-LXS-INSET NOTE: the number of TLOF perimeter lights required by legislation is strictly dependent on the size of the TLOF area in question. On elevated platforms, in most cases the TLOF area coincides with the FATO area, so the installation of TLOF perimeter lights only is required. lxs@luxsolar.com - www.luxsolar.com - Ph. +39.0341.260926 Drawings, photos and contents of this document are for informational purposes only and subject to change without any notice.

Abrir o catálogo na página 1

PERIMETER LIGHT - TLOF INSET TLOF-LXS-INSET - 2

OPTICAL FEATURES ELECTRICAL FEATURES Horizontal emission: 360° PMMA and tempered glass lenses MECHANICAL FEATURES Anodized aluminium body EPDM o-ring Degree of protection: IP68 Shallow base 5" Operating temperature: -20°C to +60°C Supplied with 30cm LUXSOLAR standard cable Weight: 4,8kg Tempered glass max load 5 ton • Power supply 12/24/48 Vdc or only from control panel if 115/230 Vac or if dimming of lights is needed • Consumption: 3,7W @12/24Vdc • Constant current driven LED • Light intensity adjustment: 10% - 30% - 100% OPTIONS • Adaptor for shallow base 8"/ 12" • Wireless version • Wave...

Abrir o catálogo na página 2