Catálogos >
LIDERING >
AUXILIARY PRODUCTS

AUXILIARY PRODUCTS
1 / 3Páginas

Excertos do catálogo

AUXILIARY PRODUCTS CHARACTERISTICS: • Working pressure: 64 bar. • Temperature: up to 125º C • Materials: Stainless steel. CLEAN FLUID DESCRIPTION: SEALED CHAMBER PUMP DISCHARGE ZONE Working fluids often contain sand particles, incrusted residue from boilers and pipes etc. which can damage the mechanical seal and reduce its durability. Situations of this type can be avoided by installing a cyclone. This type of element is installed outside the pump, between the discharge zone and the mechanical seal chamber. A current or vortex of pressurised fluid is generated inside it and the effect of the centrifugal force separates the particles suspended in the fluid. The particles that are heavier than the fluid are thrown towards the walls and dragged to the lower part of the LC, while the clean fluid emerges from the top and is returned to the chamber where the mechanical seal is located. API31 and API41 configuration. These elements require no maintenance and do not become blocked over time. CHARACTERISTICS: • Temperature: - 30º C to +110º C. • Working pressure: 30 bar. • Volume (L) : 2 l. • Flow rate: 15 ml / run-out • Materials: Stainless steel / polyethylene. DESCRIPTION: LHP with a built-in tank for placing on the reservoir. Installed directly in the LT

Abrir o catálogo na página 1

LQT SECTORS: CHARACTERISTICS: • Temperature: -60° C to +200° C. • Working pressure: up to 25 bar. • Volume: 4, 6, 10 l. • Materials: Stainless steel. DESCRIPTION: LST for supplying barrier fluid with or without pressure in double cartridge or mechanical seal installations which enables the circulation of the barrier fluid due to the thermosyphon effect or the pumping ring (mechanical seal). API52, API53 and API53A configuration. SECTORS: DIMENSIONS CHART Dimensions in mm CHARACTERISTICS: • Ring with two allen screws for attaching it to the shaft. DESCRIPTION: This element is attached to the...

Abrir o catálogo na página 2

AUXILIARY PRODUCTS LST CARACTERISTIQUES : • Temperature: -60° C to +200° C. • Working pressure: up to 25 bar. • Volume: 4, 6, 10 l. • Materials: Stainless steel. DESCRIPTION : LST for supplying barrier fluid with or without pressure in double cartridge or mechanical seal installations which enables the circulation of the barrier fluid due to the thermosyphon effect or the pumping ring (mechanical seal). API52, API53 and API53A configuration. It may be supplied with instruments for automatic level, pressure and temperature control and verification and a cooling coil to regulate the fluid...

Abrir o catálogo na página 3