System Components
1 / 8Páginas

System Components Vacuum stations, Central filter systems, Vacuum receivers & Piping systems

System Components Introduction Labotek centralised systems are recognized for their high level of durability and performance. Labotek’s advanced technology offers frequency controlled vacuum stations and dust separation technologies reduce energy requirements dramatically. Labotek systems are quiet, maintenance free and modularly constructed with a number of blowers connected in series that maintains a deep vacuum at low air speed. Vacuum receivers type SVR are supplied in stainless steel AISI 304, with spring return vacuum valves. Vacuum receivers from Labotek can be equipped with internal...

Frequency Inverters Conveying air speed may be controlled via our frequency inverter range. The frequency controller is set in % air speed; herewith each station may have its own individual air speed setting, depending on material being conveyed. Huge energy savings are obtained, raw materials are gently conveyed increasing the life span of pipe systems and hoses. Central Filters Labotek has four different filtration systems as standard. Processors may choose between either self purifying filter, dust cyclone, blow back valve, or compressed air filter cleaning. Dust cyclone is used in...

Vacuum Receivers Labotek Vacuum Receivers type AVR & SVR are supplied in sizes from 1 litres up to alle mål i mm 200 litres. The AVR is made for small consumptions suchLT 3 Colors & Additives. AVR 6 as Type LT 4 LT 5 LT is LT 6 BB made from aluminium. The SVR range is made in stainless steel grade AISI 304. 3 kW 0,37 1,1 1,5 3 Receivers are modular and allow users to change configuration as the requirements A 253 300 345 381 381 changes. H Mouting Pattern: SVR 4-50L. Flange Dimensions Flanch masse Flange mål Vacuum reciever SVR 4-50 Litres Labotek uses a unique vacuum valve which is...

The integrated Dosing Valve type IDV is a unique built-in dosing system for non critical proportioning of two materials into the same receiver. RS2000 is an external mounted proportioning valve, for non critical dosing of two materials into same receiver. The RS2000 unit is made in lightweight aluminium housing and features a glass window. SVR with IDV and Vacuum Valve Coupling Stations A coupling station is used when a number of different raw materials are transferred to the same production machine. Labotek coupling stations are available in numerous combinations, even with a control...

Pipes and Fittings Description Coupling Station Coupling Station Coupling Station, Glass Pipe Cleaning Valve Pipe Cleaning Valve Pipe Cleaning Valve Description T-Branch Pipe Coupling Pipe Coupling Pipe Coupling Pipe Coupling for Glass bend Quick Coupling Quick Coupling Quick Coupling

Material Hoppers Labotek manufactures a wide selection of Material hoppers in either square or round design. The series are supplied in unsulated and insulated versions, where 20mm insulation thickness maintains material temperature while waiting on machine troat. The range spans from 2.5 up to 200 litres as standard, however we are able to produce Material hoppers upon request. The insulated Material hoppers also features sight glass lid prepared for Labotek vacuum receivers and standard flange for production machine. A purge valve is available as option. Labotek also offers an adjustable...

Labotek A/S Strøbjergvej 29 DK-3600 Frederikssund +45 4821 8411 info@labotek.dk www.labotek.com