Catálogos >
Kepware >
Routing ControlLogix to PLC5 via DH+ Gateway

Routing ControlLogix to PLC5 via DH+ Gateway
1 / 1Páginas

Excertos do catálogo

Routing ControlLogix to PLC5 via DH+ Gateway - 1

Routing ControlLogix to PLC5 via DH+ Gateway TECHNOLOGIES Description of KEPServerEX device ID 192.168.111.116,1,1.B.9 OPCClientApplicationAB CLXPLC5BPLC5 (B)DH+Channel B = Node 9CLXB0123CLXA0123ControlLogix (A)Slot 0 = Logix 5550Slot 1 = 1756-DHRI0Channel B = Node 11Slot 2 = 1756-CNBChannel A = Node 4Slot 3 = 1756-ENBTIP = 192.168.125.116ControlLogix to PLC5 via DH+ GatewayEthernetDH+EthernetDH+ 192.168.111.116 = 1756-ENBT module of Device A ,1 = Port # of the 1756-ENBT module where you gain access to the Back plane of the ControlLogix PLC (see port reference key) ,1 = Onto Slot 1 of 1756-DHRIO module of Device A .B = Out of Channel B of the 1756-DHRIO module in Device A .9 = Into Node 9 of Target Device (see Target Device description) INTERFACE MODULE PORT 1 PORT 2 PORT 3 1756-ENBT Back plane Ethernet Network N/A 1756-DHRIO Back plane DH+ Network on Channel A DH+ Network on Channel B 1756-CNB Back plane ControlNet Network N/A SoftLogix EtherNet/IP Messaging Virtual Back plane Ethernet Network N/A

Abrir o catálogo na página 1