Catálogos >
Keller ITS (Infrared Temperature Solutions) >
AN Glued laminated timber_201606_en

AN Glued laminated timber_201606_en
1 / 4Páginas

Excertos do catálogo

Giued laminated timber Temperature measurement: bonding timber laminations

Application note Glued laminated timber Timber laminations are planed and sorted after the drying process. Then they are cut to the required dimension and glue is applied on their flat sides. They are now piled up, forming several layers, and are pressed together. The glue is heated up with microwaves to dry quickly. The highest adhesion of the glue is given at a drying temperature of approximately 70 °C. The adhesive layer has a thickness of approximately 1 mm. Measuring procedure Measurements with insertion probes can only be made sporadically. Ideally, the temperature should be detected...

Abrir o catálogo na página 2

Other products Portix Series Almost indestructible, portable pyrometers with rugged aluminum housing for universal, rapid measurement. CellaTemp PA Series Versatile pyrometers with focusable lens, through-the-lens sighting/ laser spotlight or video camera. CellaPort PT Series Portable single-colour and two-colour pyrometers with through-the-lens sighting, laser spot light and USB interface. CellaTemp PA-LWL Versatile fiber optics pyrometers with focusable head and laser spotlight. Mikro PV Intensity comparison pyrometer for ultra accurate measurement. Since 1968, the Division of MSR...

Abrir o catálogo na página 3