MAGNETIZERS AND DEMAGNETIZERS
1 / 7Páginas

{{requestButtons}}

Excertos do catálogo

MAGNETIZERS AND DEMAGNETIZERS - 1

MAGNETIC FIELD GENERATOR For measuring management of magnetic flux density TESLA METER magnetic field strength See Page N4 for details. magnetic field strength See Page 156 for details. REFERENCE MAGNETIC FIELD MAGNETIC POLARITY CHECKER magnetic field strength See Page 156 for details.

Abrir o catálogo na página 1
MAGNETIZERS AND DEMAGNETIZERS - 2

■How to Demagnetize and Precautions for Use •Move a workpiece over the demagnetizing surface slowly in the direction of A-B. Note that the workpiece must be moved more than 20 cm away from the end of the demagnetizer to be demagnetized •When the tunnel type demagnetizer is used, pass the workpiece through the tunneled hole. •A recommended time for passing the workpiece is about 5 seconds. (Recommended speed from 3 to 5 m/min.) •Some demagnetizers may be heated to considerably high temperature due to electromagnetic induction action, but this does not affect the demagnetizing operation at...

Abrir o catálogo na página 2
MAGNETIZERS AND DEMAGNETIZERS - 3

Model KMDY TABLE TYPE DEMAGNETIZER Demagnetization has been improved by implement of stronger magnetic field. Designed for removing or reducing residual magnetism by passing affected work pieces over the demagnetizing face. •Use of a new 3-phase AC power design results in a more powerful magnetizing field to effectively demagnetize difficult work material and work shapes. •Effective demagnetization of work such as ring shapes such as assembled bearing gears. (Demagnetizing direction) •Improved heat dissipation making continuous use possible. [mm(in)]

Abrir o catálogo na página 3
MAGNETIZERS AND DEMAGNETIZERS - 4

Model KMDE STATIC TYPE DEMAGNETIZER

Abrir o catálogo na página 4
MAGNETIZERS AND DEMAGNETIZERS - 5

KMDE / KMDE-MP / KMDE-V / KMDV/ KMDU Model KMDE-V STATIC TYPE V SHAPED DEMAGNETIZER_ Static fixed position work piece demagnetization, no turning or passing! Well suited for demagnetization of ring shape work pieces. •Demagnetizes work in a one time operation. Re-positioning of work is not necessary, reducing risk of damage to part handling. •Protective plating is provided on the demagnetizing V-Faces, preventing damage to work surfaces. Re-positioning of the protection plating allows for support of uneven shaped parts. •Separate power control and KMDE-V can be located separately for...

Abrir o catálogo na página 5
MAGNETIZERS AND DEMAGNETIZERS - 6

Model KMDT TUNNEL TYPE DEMAGNETIZER These demagnetizers can meet such demagnetizing needs as passing a bucket containing a large number of small workpieces and being incorporated in a line for continuous demagnetizing by conveyor transportation. Various sizes are available to meet such requirements. They can also be used to demagnetize long workpieces and irregularly shaped workpieces. •The good heat radiation design enables continuous operation. •A uniform demagnetizing area can be obtained. •Almost uniform demagnetization can act on the whole periphery of passing workpieces. Tunnel type...

Abrir o catálogo na página 6
MAGNETIZERS AND DEMAGNETIZERS - 7

KMDT / KMDTR / KMDTC / KMDP / KMDH / KMDC Model KMDP Recommended where magnetism on the surface of metallic workpieces in general need to be reduced in a limited area or locally. This is useful to completely eliminate weak magnetism that remains locally in jigs and workpieces after they have been demagnetized by a large demagnetizer. It is also suitable for demagnetizing cutters of machines and punches and guide pins of press dies while they are mounted. •A rare earth magnet having strong magnetic force is used at the end of the rotary magnetic field. •Re-chargeable battery operation. Power...

Abrir o catálogo na página 7

Todos os catálogos e folhetos técnicos Kanetec

  1. MAGNETIC TOOLS

    5 Páginas

  2. HOLDING TOOLS

    2 Páginas

  3. KVR Vacuum Chuck

    4 Páginas

  4. CHUCK CONTROLLERS

    4 Páginas

  5. Magnetic Chucks

    4 Páginas

  6. Model EPT/ EPT-LW

    1 Páginas

  7. Model EP-QZ

    1 Páginas

  8. Model KCC-AR

    1 Páginas

  9. Model KET-UTS

    1 Páginas

  10. KET-U

    1 Páginas

  11. Model KET

    1 Páginas

  12. Model KESL

    1 Páginas

  13. Model KEC-AR/AS

    1 Páginas

  14. MAGNETIC HOLDERS

    10 Páginas

  15. LIFTING MAGNET

    14 Páginas

  16. MAGBORE

    2 Páginas

  17. MEASURING TOOLS

    1 Páginas

  18. VACUUM CHUCKS

    3 Páginas

  19. PROMELTA* SYSTEM

    1 Páginas

  20. SINE BAR CHUCKS

    5 Páginas

  21. WORKING TOOLS

    2 Páginas

  22. MAGNETIC BLOCKS

    7 Páginas

  23. CHUCK CONTROLLERS

    5 Páginas

Catálogos arquivados

  1. BLOCKS FOR MC

    1 Páginas