KEC-AR / AS / SR / BH / KETB / ES-VB Model KETB
1 / 1Páginas

Excertos do catálogo

KEC-AR / AS / SR / BH / KETB / ES-VB Model KETB - 1

KEC-AR /AS/SR/BH/ KETB / ES-VB Model KETB Pneumatic floating type Control unit required additionally (Air pressure and side slip force) Air is jetted through air holes provided on the chuck work face to float a workpiece for easy positioning, mounting and dismounting and movement. The chucks can be air cooled by adding a cooling device. This model is for grinding, but a model for cutting is also available upon request. •Workpieces having strong residual holding power can be separated and floated by the pressure of a small amount of air for easy removal. •The optimum floating condition can be adjusted according to the materials, sizes and shapes of workpieces by increasing/decreasing the air pressure supplied from the control unit. •As a small amount of air is constantly jetted through air holes during grinding, intrusion of grinding fluid and ground powder can be •The air circuit in the chuck has a construction specially developed by Kanetec to minimize clog. •The control unit is an easy-to-operate special unit incorporating an air regulator, rectifier and demagnetizer. Side rail Back rail Power Cord 2—5m %.For applications where the output current more than 5 A is required, the controller and the air control unit come as specially fabricated separate units r^The applicable air pipe diameter is 0 8 or 012. r^The output is adjusted with a variable resistor

Abrir o catálogo na página 1

Todos os catálogos e folhetos técnicos Kanetec

  1. MAGNETIC TOOLS

    5 Páginas

  2. HOLDING TOOLS

    2 Páginas

  3. KVR Vacuum Chuck

    4 Páginas

  4. CHUCK CONTROLLERS

    4 Páginas

  5. Magnetic Chucks

    4 Páginas

  6. Model EPT/ EPT-LW

    1 Páginas

  7. Model EP-QZ

    1 Páginas

  8. Model KCC-AR

    1 Páginas

  9. Model KET-UTS

    1 Páginas

  10. KET-U

    1 Páginas

  11. Model KET

    1 Páginas

  12. Model KESL

    1 Páginas

  13. Model KEC-AR/AS

    1 Páginas

  14. MAGNETIC HOLDERS

    10 Páginas

  15. LIFTING MAGNET

    14 Páginas

  16. MAGBORE

    2 Páginas

  17. MEASURING TOOLS

    1 Páginas

  18. VACUUM CHUCKS

    3 Páginas

  19. PROMELTA* SYSTEM

    1 Páginas

  20. SINE BAR CHUCKS

    5 Páginas

  21. WORKING TOOLS

    2 Páginas

  22. MAGNETIC BLOCKS

    7 Páginas

  23. CHUCK CONTROLLERS

    5 Páginas

Catálogos arquivados

  1. BLOCKS FOR MC

    1 Páginas