Catálogos >
Jewell Instruments >
C904 Clinometer Pak 420 Datasheet

C904 Clinometer Pak 420 Datasheet
1 / 2Páginas

Excertos do catálogo

Model C904 “Clinometer Pak 420” The model C904 “Clinometer Pak 420” uniaxial clinometer delivers the same reliable performance as the A904, but with 4-20mA output. Units are available with longitudinal or transverse axis configuration. The C904 operates as a 2-wire 4-20mA current loop, and will drive signal over 1000m or more. Units also include an on-board thermistor for temperature measurement. Use the C904 with industrial PLC’s, platform position and control, geotechnical monitoring, or any application where long cables are required. Angular Range Resolution Repeatability Scale Factor* Non-Linearity Output Channels Kz Coefficient (deg/C) Ks Coefficient (%/C) Time Constant Natural Frequency Power Environmental Dimensions Materials Cable Standard Wide-Angle ±25° ±50° 0.01° 0.02° 0.02° 0.04° 3.125°/mA 6.25°/mA 2.5% 7% 4-20mA, 2-wire Current Loop Tilt, Thermistor 10-20 arcsec/C 0.03%/C 0.15 sec 10 Hz (0.02 Ampere x R + 10 VDC) < Vs < 29 VDC -40 to +85°C operation and storage. IP65 120 x 80 x 60 mm, 0.5 kg (1.1 lb.) Diecast painted aluminum, 3m (10ft), 5-conductor + one overall shield, PVC jacket, tinned ends *Specifications subject to change without notice on account of continued development; 1Resolution calculated at 5 µamps; 2Linear scale factor calculated from BFSL through calibration curve; 3Linearity calculated as max % deviation from BFSL. 0.05% linearity achievable using a polynomial Ordering Code: Pin-out/Wiring: Color Temp Excitation Temp Return Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jewellinstruments.com • www.jewellinstruments.com • Tel

Abrir o catálogo na página 1