Catálogos >
JET EDGE >
Mobile System Components

Mobile System Components
1 / 1Páginas

Excertos do catálogo

Mobile System Components A mobile waterjet system has three major components. A typical application is shown but the components will vary depending on the combination of the mobile pump, water tool, and support equipment. Mobile Intensifier Pump The mobile intensifier pump produces the ultra high pressure (UHP) water needed for the water tools. The pump can be diesel or electric powered and rated for 36,000 psi (2500 bar) or 55,000 psi (3800 bar). Water Tools Cleaning On/Off Trigger Air Supply UHP Water Water Tools Water tools are used to clean or cut material. All water tools require support equipment. The type of support equipment varies with the type of water tool. Support Equipment Support equipment includes things like a water tank to supply the mobile pump, an air compressor to operate a water tool, an abrasive distribution system for cutting tools, and control boxes to turn the UHP water/air on or off to the water tool. Mobile Intensifier Pump Cutting additional support UHP Water Abrasive Supply Support Equipment UHP Water Low Pressure Water Water Tank Air Supply Remote Control Box Air Supply Air Compressor Water Supply Air Powered Water Pump Cleaning Tools Cutting Tools Cleaning tools are used to strip material from a surface and prepare it for resurfacing. Cleaning tools include the following: Cutting tools are used to cut through material. Cutting tools are equipped with an abrasivejet. Cutting tools include the following: Lance—a hand-held tool with a single nozzle to clean smallsized areas. Lance—a hand-held tool that directs an abrasive water stream to cut material. GyraJet—a hand-held tool that rotates a manifold with multiple nozzles to clean medium-sized areas. Spyder Abrasivejet—a tool that follows a track to direct an abrasive water stream in a linear motion to cut material. Deckblaster—a lawn mower style tool that rotates a spray bar with multiple nozzles to clean large-sized areas. Pipe Cutter—a tool that follows a track to direct an abrasive water stream to cut pipes. Water Supply www.jetedge.com 1-800-538-3343 The mobile intensifier pump requires a water supply. The water supply is typically pumped from a portable water tank; a municipal water supply can also be used when available.

Abrir o catálogo na página 1

Mobile System Components 1 / 1Páginas

Excertos do catálogo

Todos os catálogos e folhetos técnicos JET EDGE

Mobile System Components
1 / 1Páginas