Flotation Wash Line
1 / 6Páginas

Excertos do catálogo

Flotation Wash Line - 1

FTNON Flotation Wash Line The combination of special techniques gives an optimal washing result, while the product is treated as delicately as possible. The flotation wash line is specially designed to wash and mix products such as cut salads, vegetables and herbs

Abrir o catálogo na página 1
Flotation Wash Line - 2

Wash line standard configuration The wash line consists of 2 washers placed behind each other. The product is transferred from the first washer to the second washer by a dewatering belt. The product is transferred from the second washer by a second dewatering belt. Below both dewatering belts, a filter is placed which will collect the water and filter it before it is circulated. Washing The product arrives in a water bath with a calm flow. Air is being injected into the water bath. This air injection creates a whirlpool effect. Thus the product is being massaged so that dirt comes loose...

Abrir o catálogo na página 2
Flotation Wash Line - 3

JBT FTNON Flotation Wash Line Technical specifications - dewatering belt - fresh water spraying pipe - filter FLW 060 PVC mesh belt 1x1 mm, blue with stainless steel zip PVC mesh belt 1x1 mm, blue with stainless steel zip Steel plate without hollow sections Steel plate without hollow sections drum motor drum motor complete with quick release system complete with quick release system VALVE manual SUPPLY FRESH WATER pipe 1” DEWATERING BELT WIDTH 500 mm - 20” LENGTH 1,800 mm - 71” BELT TYPE PVC mesh belt 1x1 mm, blue with stainless steel zip FRAME TYPE Steel plate without hollow sections SIDE...

Abrir o catálogo na página 3
Flotation Wash Line - 4

JBT FTNON Flotation Wash Line TECHNICAL SPECIFICATIONS - SEPARATION DRUM FLOATING PARTICLES DIAMETER Ø 950 mm - 37” Ø 10 mm / Ø 15 mm - Ø 0,4” / Ø 0,6” PERFORATION to be agreed DRIVE Geared motor drive 3) Frequency inverter on separation drum floating particles The separation drum can be executed with a frequency inverter so the retention time can be controlled more specific. 4) Lift system for separation drum floating particles The separation drum for floating particles can be lifted. This way the products that are smaller than the perforation of the drum can also be washed. The lift...

Abrir o catálogo na página 4
Flotation Wash Line - 5

JBT FTNON Flotation Wash Line TECHNICAL SPECIFICATIONS - COOLING COIL WASH WATER TEMPERATURE +4°C (38°F) GLYCOL TEMPERATURE IN -7°C (16°F) GLYCOL COOLING SYSTEM Not included GLYCOL CONTROL VALVE not included TEMPERATURE SENSOR PT100 not included CONNECTION 1” (BSP) PRODUCT TEMPERATURE IN max. 4oC (38oF) REFRESHMENT max. 4oC (38oF) WATER TEMPERATURE AMBIENT TEMPERATURE max. 4oC (38oF) GLYCOL CONTROLS not included 11) Ventilator with air knife in dewatering belt 13) Demister for suction ventilator Product which does not automatically come of the last dewatering belt at the outfeed side will...

Abrir o catálogo na página 5
Flotation Wash Line - 6

JBT’s greatest value in PRoCARE® services comes from preventing unexpected costs through smart, purposeful, and timely maintenance based on unmatched knowledge and expertise. PRoCARE service packages are offered as a maintenance agreement in various service levels, depending on your production and cost management requirements. JBT LIQUID FOODS FRESH PRODUCE TECHNOLOGIES   |  FRESH-CUT, ROBOTICS, STEAMING   |  FRUIT AND VEGETABLE PROCESSING   |  SECONDARY PROCESSING   |  ASEPTIC SYSTEMS   | FILLING AND CLOSING   |   IN-CONTAINER STERILIZING   |  HIGH-PRESSURE PROCESSING   |  POWDER...

Abrir o catálogo na página 6

Todos os catálogos e folhetos técnicos JBT Corporation

  1. Water filtration

    4 Páginas

  2. Avure HPP AV-X

    4 Páginas

  3. Avure HPP AV-10

    4 Páginas

  4. Avure HPP AV-S

    4 Páginas

  5. Static Retort

    8 Páginas

  6. Tuna Cooker

    4 Páginas

  7. Tuna Filler 3266

    4 Páginas

  8. Vibrating System

    13 Páginas

  9. Air Cleaner

    4 Páginas

  10. Wahers

    6 Páginas

  11. FVPGrow

    4 Páginas

  12. JBT PLF Virtus

    4 Páginas

  13. SuperCRss™

    4 Páginas

  14. Hot Break System

    2 Páginas

  15. Cold Break System

    2 Páginas

  16. DCC Belt Steamer

    8 Páginas

  17. FLEX-ID System

    2 Páginas

  18. Single Pass Dryer

    2 Páginas

  19. Brush Bed System

    2 Páginas

  20. X59-Can-Closer

    4 Páginas

  21. SeamTec

    2 Páginas

  22. Tuna

    2 Páginas

  23. Unifiller

    8 Páginas

  24. Flash-Cooler

    4 Páginas

  25. Heat Exchangers

    4 Páginas

  26. SteriCompact

    2 Páginas

  27. Sterideal Ohmic

    4 Páginas

  28. MEDALLION

    4 Páginas

  29. Aseptic_Filler

    8 Páginas

  30. FranRica

    2 Páginas

  31. BottleTec

    2 Páginas

  32. Pulper-Finisher

    4 Páginas

  33. GTRe

    2 Páginas

  34. GT1-Lid Machine

    2 Páginas

  35. AP60

    2 Páginas

  36. GT5eX-Twin

    2 Páginas

  37. GT4e

    2 Páginas

  38. GTeX-Twin

    2 Páginas

  39. GT2e

    2 Páginas

  40. GT1e

    2 Páginas

  41. GT0e

    2 Páginas

  42. GT2sX-Twin

    2 Páginas

  43. GT2s

    2 Páginas

  44. GT1s

    2 Páginas

  45. GT0s

    2 Páginas

  46. TASTE Evaporator

    8 Páginas

  47. Hybrid Evaporator

    4 Páginas

  48. Chopper/Blender

    4 Páginas

  49. Pumpideal

    4 Páginas

  50. Hot Break

    2 Páginas

  51. Cold Break

    2 Páginas

  52. Roller Spreader

    2 Páginas

  53. READYGo JUICE SJE

    4 Páginas

  54. READYGo JUICE DJE

    4 Páginas

  55. Brush Washer

    2 Páginas

  56. Beltroll Sizer

    4 Páginas

  57. Swirl bath washer

    6 Páginas

  58. Weighing conveyor

    2 Páginas

  59. Knocker conveyor

    4 Páginas

  60. DCC Screw steamer

    4 Páginas

  61. Crate Washer

    4 Páginas

  62. Bin Tipper

    4 Páginas

  63. Air Dryer

    4 Páginas

  64. Belt Cooler

    2 Páginas

  65. AV Sealer

    2 Páginas

  66. Juice Extractor

    4 Páginas