Catálogos >
ISCAR Tools >
Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools
1 / 9Páginas

Excertos do catálogo

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools

Highlights ISCAR is adding new 1.6 mm inserts and tools which will be carried on new blades, integral shank tools and slitting cutters. Following market demand, ISCAR is adding 1.6 mm inserts and tools to its very successful TANGGRIP single-ended parting, grooving and slitting line. The new TAG N1.6C and TAG N1.6J inserts are made from IC808 and IC830 PVD coated grades. They will be carried on new blades, integral shank tools and slitting cutters: • TGFH ..-1.6 blades in sizes 19, 26 and 32 • TGTR/L…-1.6-IQ in 10, 12 and 16 mm square shank sizes • TGSF …-1.6… slitting cutters in 50, 63, 76,...

Abrir o catálogo na página 2

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 3

Parting and Grooving Single-Ended Insert for Parting Bars, Hard Materials and Tough Applications W Recommended Machining Data • Feed values for grade IC20 should be decreased by 50% (1) Larger corner radii for interrupted-cut and high feed applications. (2) Similar to C-type, but with a modified edge. Improved chip control at medium feeds.

Abrir o catálogo na página 3

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 4

Parting and Grooving Single-Ended Insert, for Soft Materials JT Recommended Machining Data • JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge. Most suitable for soft materials at low to medium feeds. The JS-type has sharp corners. (1) Sharp corners

Abrir o catálogo na página 4

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 5

Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-Ended Inserts (1) With coolant holes, recornmended coolant pressure: 10 bar rnin, cooling tube SGCU 2.50 rnrn (3) Thickness beyond the D.O.C. area is 1.60 rnrn W Thickness at the D.O.C. 341 should be ordered separately. (2) Thickness beyond the D.O.C. area is

Abrir o catálogo na página 5

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 6

Blades with Tangentially Oriented Pocket for Parting and Grooving, for TANG-GRIP Single-Ended Inserts TGFH...1.4/1.6 Spare Parts Sealing Screw * Optional, should be ordered separately Cooling Tube SGCU SGCU SGCU SGCU SGCU Designation TGFH 19-1.4 TGFH 19-1.6 TGFH 26-1.4 TGFH 26-1.6 TGFH 26-2 TGFH 26-3 TGFH 26K-3 TGFH 26-4 TGFH 26-5 TGFH 32-1.4 TGFH 32-1.6 TGFH 32-2 TGFH 32-3 TGFH 32K-3 TGFH 32-4 TGFH 32K-4 TGFH 32-5 TGFH 32-7 TGFH 45-3 TGFH 45-4 TGFH 45-5 TGFH 45-6 TGFH 45-7 TGFH 52-7 TGFH 53-7 TGFH 52K-8 TGFH 53K-8 TGFH 52K-9 TGFH 53K-9 TGFHR/L 53K-12 TGFH 100-9 TGFH 100-12 TGFH 150-12

Abrir o catálogo na página 6

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 7

Integral Shank, TANG-GRIP Parting and Grooving Toolholder * Optional, should be ordered separately

Abrir o catálogo na página 7

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 8

Slitting Cutters with TANG-GRIP Inserts • ETG extractor should be ordered separately. • For drive flange set dimensions, refer to Drive Flange R (1) Trnax=26 and D3=46 when used with drive flange.

Abrir o catálogo na página 8

Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools - 9

Slitting Cutters with TANG-GRIP Inserts Drive Shank SW/S (SS) * Optional, should be ordered separately Designation TGSF 50-1.6-8KR TGSF 63-1.6-10KR TGSF 76-1.6-22A TGSF 100-1.6-22A TGSF 125-1.6-27A TGSF 50-2-8KR TGSF 63-2-10KR TGSF 80-2-22KR TGSF 100-2-22KR TGSF 125-2-32KR TGSF 50-3-8K TGSF 63-3-10K TGSF 80-3-22K TGSF 100-3-22K TGSF 125-3-32K TGSF 160-3-32K TGSF 63-4-10K TGSF 80-4-22K TGSF 100-4-22K TGSF 125-4-32K TGSF 160-4-40K

Abrir o catálogo na página 9