Programmable Temperature Transmitter Series: TTH109
1 / 1Páginas

Excertos do catálogo

Programmable Temperature Transmitter Series: TTH109 - 1

INDUMART Canada Programmable Temperature Transmitter SERIES: TTH109 RTD OR THERMOCOUPLE INPUT 2-WIRE CURRENT OR 3-WIRE VOLTAGE OUTPUT RS232 SERIAL INTERFACE FOR CONFIGURATION DIN-RAIL VERSION OR IP65 PROTECTION BOX AVAILABLE (OPTION) CAN BE BOTH PROGRAMMED THROUGH MICROSWITCHES OR JUMPERS AND VIA SERIAL INTERFACE AND SOFTWARE Indumart TTH109 Series of Programmable Temperature Transmitters provide accurate and reproducible conversion of pt100 RTD and thermocouple signals to 2-wire 4-20 mA or 3-wire 0-10 VDC output. Measurement Error Nonlinearity for RTD Temperature Drift Cold Junction Compensat'n The user may configure the transmitter through microswitches (for rail-mounted model) or jumpers. Using the RS232 serial interface along with the programming software allows selections of the input sensor, the input range, the output direction and the sensor failure action by the user. Configuration is fast and easy. The user must select between a 2-wire current output or a 3-wire voltage output at the time of ordering. The TTH109 Series are mounted on the standard 33 mm fixing centers of miniature RTD or thermocouple connection heads. Optionally, the transmitter maybe ordered as DIN rail mounting or secured in an IP65 rated box. 0.3% of span With in the error limit 0.01% of span for 1°C Automatic with in 0.5°C 3-wire RTD line Compensat'n up to 25Ù per wire Current Output Signal 4...20 mA with maximum load of 800Ù @ 24V / 20mA 0...10 V (min. load of 1 MÙ) Power Supply 8...36 VDC (2-wire mA Output) 12...36 VDC (3-wire volt Output) Output @ Sensor Break <3.8 mA or >20.2 mA Programmable Interface Type RS232 with special cable* Operating Condition -30...80°C; 0...95% RH Case Material Hard plastic DIN-Rail In Head In Box Mounting Protection Case/Terminal IP20 IP20 IP65 Dimensions (mm) 90x18x58 Ø44x19 80x80x60 Weight (g) 90 30 170 * The RS232 cable must be ordered separately. ORDER CODE Input signals of TTH109 Series Input Type Pt100 (3-wire) Thermocouple Thermocouple Thermocouple Thermocouple Thermocouple Thermocouple Thermocouple Thermocouple -200...+600°C T -40...+400°C E -20...+600°C J -20...+900°C K -20...+1200°C N -20...+1200°C R 0...+1700°C S 0...+1700°C B 200...+1800°C The transmitter's input/output conversion may be programmed to act in direct or reverse manner. Output Signal 4..20 mA ( 2-wire) 0...10 V (3-wire) Mounting In-head In box (box included) 35-mm DIN-rail 1-15 W. Pearce St., Richmond Hill, Ont. L4B 1H6, Canada Phone: (905) 707-9998 Fax: (905) 707-8484 E-mail: Sales@Indumart.com

Abrir o catálogo na página 1

Todos os catálogos e folhetos técnicos Indumart

  1. FTT20

    2 Páginas

  2. FTM45

    4 Páginas

  3. DIS14

    1 Páginas

  4. DIS12

    1 Páginas

  5. PST600

    2 Páginas

  6. PST400

    2 Páginas

  7. PRES-SWTCH-2000

    1 Páginas

  8. PSM230

    2 Páginas

  9. PSM210

    2 Páginas

  10. LSQ100

    2 Páginas

  11. BLS903

    4 Páginas

  12. LSD300

    4 Páginas

  13. LSF400

    2 Páginas

  14. LSF200

    2 Páginas

  15. LSF100

    2 Páginas

  16. LSF50

    1 Páginas

  17. LSF20

    1 Páginas

  18. FST140

    1 Páginas

  19. FSP120

    1 Páginas

  20. FPS120

    2 Páginas

  21. LCA-860

    2 Páginas

  22. UCA870

    2 Páginas

  23. UCA850

    2 Páginas

  24. S11

    1 Páginas

Catálogos arquivados