MACROTESTG3, PQA820, COMBIG2 and HTAnalysis a new working concept by HT
1 / 20Páginas

Artificial Intelligence. Thanks to the creation of App HTanalysis it is possible to interface HT last generation instruments with tablets and smartphones. HTanalysis is a professional software allowing to display and look at measurements or recordings on your devices then sharing them on HTCloud database. HTanalysis permits to create professional reports complete with pictures, texts, video and voice notes. Interfacing the instrument with your device’s display you can look at a fast and detailed tracking of the recorded quantities on touch-screen. With PQA820 › enables you to display...

Share. Whenever, whatever and wherever. Install App HTanalysis to avail yourself of HTCloud database and share measurement results and recordings with your colleagues from any place on the planet.

I'm pure technology. Touch me, please.

Clear answer. Complying o not. Share. Whenever, whatever and wherever* › O ne instrument for all electrical safety tests according to › dvanced Loop. Testing of MCBs, fuses and cable sizing. A › resistance with 2- or 3-pole volt-ampere method in TT, TN and IT Earth systems, non-trip earth loop impedance measurement, stackless earth ground resistance measurement with T2100 (optional). Soil resistivity. › easurement of electrical parameters in single phase installations M Save time! You will take half time! Color Touch Screen with icon intuitive graphics Power measurement App HTanalysis for...

• Test on general, selective and delayed RCDs . Test on RCDs with external toroidal transfor- • Test mode xVz, x1, x2, x5 and AUTO to make 6 test sequences. • Ramp: measurement of real tripping current. 'with optional accessory RCDX10. Selection of RCD type and tripping Selection of tripping current on RCDs Setting of RCD delayed time anient with external toroidal transformer AUTO test result on RCD Ramp test result on RCD Insulation resistance • AUTO function • Rapid setting of limit values and test voltages through virtual keyboard. • Setting of Timer for the test • Calibration of...

Measurement of phase sequence SEQ Check of phase sequence with 1 or 2 terminals. Check of phase compliance. Measurement of leakage currents Leakage current can be measured with external clamp HT96U (optional). Virtual keyboard to enter comments. Saving on file structure. N ew detailed reports with TopView software. Saving with file tree Entering comments on measurements Transfer of data to PC by TopView software HTanalysis™ and HTCloud™ App HTanalysis will change your working concept. During testing you can: • Dictate comments orally • Associate a picture or a video to each measurement •...

Advanced Loop Testing of MCBs, fuses and cable sizing. For the first time ever. For the first time you will be able to check whether a complex system is working in compliance with standards. HT enriched loop measurement including functions and tests which were earlier possible just thanks to project-oriented calculations. The rules of the game? We know all the answers. I n order to protect power lines, IEC/EN61557-1 standards require designers to size the installation to grant: • protection against indirect contacts • protection against short circuits. MacrotestG3 is quite familiar with...

Testing of protection against indirect contacts (TT-TN-IT systems) When an earth fault occurs masses can become potentially dangerous as long as protection trips out. The instrument checks that danger does not overcome the limits set by the standards. For example in a TN system after setting the curve type and tripping time of MCB the instrument calculates short circuit current with positive outcome if MCB trips out before contact voltage becomes dangerous. Testing of MCB tripping time. If MCBs comply with tripping times provided by the standards the instrument will indicate positive...

Tech specs Continuity with 200mA Power and Load Analysis Measuring range: 0,01Ω÷99.9Ω Accuracy: ±(5.0% reading + 3 digits) Test current: > 200mA (R ≤ 2Ω) Open circuit voltage: 4V ≤ V0 ≤ 12V Insulation resistance and apparent power measurement › Cosphi, power factor measurement › Single Phase and Three Phase balanced systems › Voltage,Current and frequency measurement › Active power, reactive power Measuring range: 0.01Ω ÷ 199.9Ω Resolution: 0.01Ω min (0.1mΩ with optional accessory IMP57) Accuracy: ±(5.0% reading + 3 digits) Test voltage: 100÷265V (L-N) / 100÷460V (L-L), 50/60Hz Maximum test...

General specifications Non-trip earth loop impedance Active Power (@ 230V in 1Ph systems, 400V in 3 Ph systems, cosphi=1, f=50.0Hz) L-N, L-PE voltage range: 100V ÷ 265V, 50/60Hz ± 5% Measuring range: 0,01Ω÷ 999Ω (systems with neutral) 1 1Ω÷ 999Ω (systems without neutral) 1 Accuracy: ±(5.0% reading + 3 digits) Test current: <15mA Allowed crest factor ≤ 1,5 320x240 resistive color LCD with touch screen 999 locations, 3 marker levels optical/USB and Wi-Fi 225 x 165 x 75 mm / 8.8 x 6.5 x 2.9 in Weight (including batteries) 1.2 kg / 2.5 lb Reactive Power (@ 230V in 1Ph systems, 400V in 3 Ph...

3-banana to Shuko plug cable Kit including 4 cables, 4 alligator clips and 2 test leads Soft carrying bag containing 4 cables and 4 earth rods Remote switch probe PC software and optical-to-USB connection cable C2006 Rechargeable NiMH battery 1.2V, AA, 6 pcs External battery charger for 8 pcs. type AA batteries user’s guide T ransducer for AC currents (including leakage current) 0 ÷ 1, 0 ÷ 100, 0 ÷ 1000A AC High resolution impedance measurement adapter Earth ground clamp transducer Transducer for temperature/humidity measurement Transducer for illuminance measurement Magnetic adapter for...

Continuity of earth conductors with 200mA • Earth resistance with 2-wire and 3-wire methods • Earth resistance with clamp •** Ground resistivity with 4-wire methods • Global earth resistance without RCD's tripping • Line/Fault impedance, Phase-Phase, Phase-Neutral, Phase-PE • Line/Fault impedance, Phase-Phase, Phase-Neutral, Phase-PE with high res. (0.1 mO) •* Prospective short circuit/fault current • Contact voltage • General, Selective and Delayed RCD's tripping time • RCD's test current type A, AC max 1A and B type max 300mA • Test on earth leakage delay testers RCD up to 10A • *** RCD...