HIOKI’s Next Generation Automotive Measurement Solutions
1 / 12Páginas

Next Generation Automotive Measurement Solution Series HIOKI’s Next Generation Automotive Measurement Solutions

Fast Charging Stations Power Systems Batteries Automotive Electronics Maintenance Wireless Power Transmission Evaluation System

Evaluate EV Fast Charging Stations During Development Conduct motion assessment by simultaneously recording output voltage, current and control signals in EV fast charging stations. Directly measure up to 1000 V DC (700 V AC) with the MR8905 module Ensure testing and equipment safety with all-channel isolation Using the MR8904, you can freely select specific signals from the CAN-bus and convert them into analog or logic signals (output voltage/current into EV CAN control signals). Output voltage/current to EV AC/DC CURRENT PROBE CT6843, etc. Control signal ANALOG UNIT MR8901 ANALOG UNIT...

Power Systems Power Conversion of Power Systems Assess Motor Integrity Evaluating a vehicle under actual driving conditions is an indispensable part of the development process. During assessment, motors are tested under many states including idle-stopping/starting, switching between the motor and engine, while generating or charging electricity, electric power-only driving, auxiliary electric power driving, braking energy recovery system, and idling. Torque sensor 10 ms sampling rate Automatically measures and adjusts to fluctuating frequencies starting at 0.1 Hz Generates X-Y charts of...

Power Systems Auxiliary battery Energy Consumption Assessment Tests Excellent DC power accuracy High-precision sensors (operating temperature range: -40°C to 85°C [-40°F to 185°F]) Integrated power of charging/discharging according to polarity at a sampling rate of 5 MS/s Low phase Medium phase High phase Extra high phase Working in tangent with our own high accuracy clamp current sensors, HIOKI power analyzers support needs for the highest accuracy measurements of integrated current and power charge/discharge tests of battery packs in EV systems. Test cycle example Example of DC power...

Compliance Testing of Batteries Battery diagram The battery, which bears the responsibility of delivering all of the energy in an electric vehicle, must offer safety and a long service-life. An EV usually contains hundreds or even thousands of battery cells, and safe operation is dependent on maintaining consistent stability for all the battery cells in use. In order to ensure consistent electrical characteristics when a s s em b lin g bat ter y c ell s into m o d ul es, a s s es s m ent a n d screening of individual cells are required. Positive electrode Negative electrode Ion movement in...

Test High-voltage Battery Packs Conduct high-voltage DC testing at 1000 V with the BT3564. An anti-spark function prevents arcs or sparks that tend to occur during high-voltage testing. Connection Testing of Battery Systems Test DC resistance to determine the connection state Resistance range: 0.00 μΩ to 1200 MΩ; resolution: 0.01 μΩ Check the reliability of electrical connections and the connection tabs and wires in a battery system. When there is a defect in the welding, resistance will increase in the joints, leading to heat emission and damage during charging and discharging. You can...

Test multiple points simultaneously Record ECU Signals Due to the development of the electronic control units (ECU) in vehicles, automotive sensors are becoming more miniaturized, multifunctional and integrated. In order to carry out a full set of functional tests for vehicles, sensor signal logging is essential. While multiple channels and high signal acquisition speed are required, the demands on measurement equipment are also increasing. ■ Multiple channels for high-speed data transmission ■ Isolation between channels Wheel speed a Many types of sensors for a diverse range of...

Test Electrical Characteristics of Auto Parts In next generation vehicles, the types and number electronic parts continue to increase. To design vehicles with advanced functions, electronic components and parts must be tested in the R&D stage. Test Component Integrity Select the instrument according to your application's frequency range. ■ High-precision testing ■ A wide variety of test fixtures Piezoelectric components Q Test Parameters (Four-component mode) L1 (inductance) C1 (capacitance) R1 (resistance) C0 (parallel capacitance) Qm (mechanical resonance m-quality factor, mechanical...

Essential Tools for On-site Maintenance In terms of maintenance, alternative energy vehicles have needs that are different from those of conventional automobiles. To meet increased electrification and power system changes, even more inspections must be conducted during auto maintenance and repair in order to ensure driving safety. Terminal Shutters Prevent Incorrect Insertion of Leads Inspect high voltage wire harnesses After operating a vehicle over a long period of time, continuity and insulation problems may appear in high-voltage wire harnesses. The performance of the harnesses...

Fully Automated WPT Evaluation Testing WPT TEST SYSTEM TS2400 Integrated measurement and an XYZ stage delivers high-speed analysis of various multi-point measurements. ■ Generate 4 separate characteristic graphs in real time ■ Automatically control the position of the power transmission coil (max. 800 mm) ■ Two types of transmission efficiency measurements plus simultaneous testing of the surrounding conditions Automatic position control of power transmission coil (max. 800 mm) _ Fastest speed: 3000 points/h Long stroke design X,Y ±300mm Z ±100mm Auto-generation of 4 graphs even during...

ISO/IEC 17025 Calibration (JCSS) HIOKI is an international MRA-compliant, JCSS-accredited calibration service provider that meets ISO/IEC 17025 requirements. This enables us to issue JCSS calibration certificates bearing the international MRA-compliant JCSS mark that are recognized worldwide. JCSS calibration and international MRAs NITE (National Institute of Technology and Evaluation) IA Japan (International Accreditation Japan) JCSS (Japan Calibration Service System) (mutual recognition agreement) Calibration service providers Calibration certificates that are recognized worldwide This is...