DC HIPOT TESTER ST5680
1 / 8Páginas

Bring additional inspection performance to safety testing. Accelerate battery quality improvements with waveform analysis. Product concept Growing adoption of electric vehicles (EVs) and self-driving technology is leading to more rigorous reliability requirements for automotive components, pushing up quality.Degradation of EV batteries and related issues can lead to serious accidents, including fire.Consequently, safety and quality control are becoming even more important than in the past. Market requirements “Manufacturers want to manage test results using waveform data to verify battery quality.” “Manufacturers want to conduct shipping inspections (DC withstand voltage tests) that comply with a range of international standards.” The ST5680 is a DC Hipot tester that was developed to meet these battery market requirem

Preventing the shipment of batteries with latent defects that could lead to fires. Test waveform display Detection of minuscule defects Prevention of erroneous judgments Waveform display function Verify insulation performance with waveforms and values. The ST5680 is a DC Hipot tester that can perform DC withstand voltage testing and insulation resistance testing in compliance with a variety of safety standards. In addition to generating PASS/FAIL judgments, the instrument can display and record applied voltage waveforms and leakage current waveforms acquired during testing. Its ability to...

Arc discharge detection function Prevent minuscule failures due to arc discharges. The ST5680 can detect arc discharges, which are caused by residual materials like burrs and cuttings. By correctly identifying parts with minuscule insulation defects as defective, the instrument helps prevent the risk of hazards such as fires and accidents caused by heating after shipment. Contamination with foreign material during the production process Detection of arc discharges triggering a FAIL judgment Detection of parts with minuscule defects + Burrs at a weld location Foreign material between cells...

High-performance model specifically designed for DC withstand voltage testing High output High stability Detection of minuscule currents Featuring testing quality that’s a step above. Accommodate the full array of DC withstand voltage testing applications with specs that comply with a broad range of international standards. Ideal for withstand voltage testing of batteries, motors, electronic components, and other parts The ST5680 tests insulation performance by applying a high voltage to the test target. It’s capable of performing safety testing for a broad assortment of targets, including...

Power supply performance that satisfies test conditions defined by international standards Output voltage: Max. 8 kV Output current: Max. 100 mA The ST5680 provides two modes: DC withstand voltage test mode, which evaluates insulation by measuring the leakage current in the test target, and insulation resistance test mode, which evaluates insulation by measuring resistance. In DC withstand voltage testing, it can output up to 8 kV, one of the highest values for any instrument of its kind. Test cycle times can be reduced since it can charge test targets quickly with high-capacity, 100 mA...

Interfaces USB memory interface DANGER lamp START button STOP button Rotary knob Main power switch External switch terminal EXT I/O mode switch (NPN/PNP) EXT I/O terminal Blank panel or GP-IP interface Z3000 (option) Voltage output HIGH terminal Voltage output LOW terminal Power inlet HIGH VOLTAGE TEST LEAD L2260 Clip to special connector, red and black, 1.5 m GP-IB CONNECTOR CABLE 9151-02 For the Z3000, 2m UNPROCESSED LEAD CABLE L2261 Bare wire to special connector, red and black, 5 m REMOTE CONTROL BOX (SINGLE) 9613 For starting/stopping measurement, one-handed use, 1.5 m RS-232C...

External control and other communications interfaces EXT I/O GP-IB (option) The instrument ships standard with LAN and USB connectors. An optional GP-IB or RS-232C interface can also be added. The instrument can be connected to a PC or programmable logic controller (PCL), which can be used to control it and retrieve test results. Furthermore, the instrument provides external I/O terminals to facilitate instrument control and retrieval of instrument status and judgment results. The EXT I/O connector on the rear of the instrument can be used to control the instrument by outputting TEST...

(Accuracy guaranteed for 1 year) Saves test condition settings internally in the instrument. DC withstand voltage testing/insulation resistance testing: Panel memory function Up to 64 sets of settings each Program testing: Up to 30 programs (max. 50 steps) Insulation breakdown voltage testing: Up to 10 sets of settings Data memory function Saves measured values in the instrument’s internal memory (up to 32,000 values). Judgment functionality PASS judgment, FAIL judgment (UPPER FAIL, LOWER FAIL) UPPER_FAIL: Measured value > upper limit value Judgment output PASS : Upper limit value ≥...