Catálogos >
Hegewald & Peschke Meß- und Prüftechnik GmbH >
Modernisation of universal testing machines

Modernisation of universal testing machines
1 / 4Páginas

Excertos do catálogo

Modernisation of universal testing machines - 1

Hegewald & Peschke, Mel3- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telefon: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: info@Hegewald-Peschke.de http://www.Hegewald-Peschke.com

Abrir o catálogo na página 1

Modernisation of universal testing machines - 2

Hegewald & Peschke Melik und Pruftechnik GmbH offers modernizations of spindle mechanical and hydraulic universal testing machines. In many cases, modernization can be a cost-efficient alternative to purchasing a new machine. In general, any electro-mechanical and hydraulic testing machine can be updated. The only requirement is that the actuating spindles or the cylinder and the piston are in a precise working condition. Often times, existing accessories (load cells, clamps, extensometers) can be integrated into the modernization upon inspection by our service. The modernization...

Abrir o catálogo na página 2

Modernisation of universal testing machines - 3

Retrofitting kit for spindle mechanical testing machines: Control and measuring electronic system EDC220/580 Force, path, stroke control of electric DC or AC actuators with the power module integrated into the control container Operator panel with display (force and path indicator) for manual control Force channel installed into the control electronic including 1 calibration plug for the existing load cell (with new force transducer as an option) additional DMS channels for force or strain are optionally available Work hours for retrofitting, (instruction and software are invoiced...

Abrir o catálogo na página 3

Modernisation of universal testing machines - 4

Control and measuring logs consisting of: • Control and measuring electronic system EDC 220/580 • Force, path, stroke control • Operator panel with display (force and path indicator) for manual control • One force channel including 1 calibration plug for the existing pressure sensor integrated into the control electronic • Calibration of the machine according to DIN EN ISO 7500 (force channel) with protocol, Please note: The accuracy class depends on the technical condition, the preciseness of the measuring system and the adjustment/calibration ability of the sensor/sensors to be...

Abrir o catálogo na página 4