Excertos do catálogo

DATA SHEET PW37P… “Hygienic design” single-point load cell SPECIAL FEATURES S Maximum capacities 50 kg, 100 kg, 200 kg S Stainless steel S High ratio of minimum verification interval Y S EHEDG-certified S Easy to clean S “Hygienic design” M12 connection cable DIMENSIONS Dimensions in mm (1 mm = 0.03937 inches) 1-KAB175 Connector plug Maximum capacity 50 kg, 100 kg Maximum capacity 200 kg
Abrir o catálogo na página 1
SPECIFICATIONS Type Accuracy Number of load cell verification intervals Maximum capacity Minimum load cell verification interval for PW37P Maximum load cell verification interval for PW37P Temperature coefficient of the zero signal per 10 K for PW37P Minimum load cell verification interval for PW37PY Maximum load cell verification interval for PW37PY Temperature coefficient of the zero signal per 10 K for PW37PY Maximum platform size Rated output (nominal) Zero signal (without initial load) Temperature coefficient of sensitivity per 10 K2) in the temperature range +20 … +40°C Rated...
Abrir o catálogo na página 2
INSTALLATION ADVICE Platform center Load application Mount plug with tightening torque of 4 Nm Run the cable in a straight line from the male connector Mounting holes Mounting holes Seal min. 6* Intermediate plate (customer responsible for construction) * For easy cleaning in accordance with the EHEDG design criteria, a minimum distance of 6 mm is recommended. Plug-in contact 1 = measurement signal (+) Plug-in contact 2 = not in use Plug-in contact 3 = sense lead (+) Plug-in contact 4 = not in use Plug-in contact 5 = sense lead (-) Plug-in contact 6 = excitation voltage (-) Plug-in contact...
Abrir o catálogo na página 3
ACCESSORIES Connection cable Connection cable with M12 F male connector, 8-pin, stainless steel IP68/IP69K, hygiene design, 3 m long Connection cable with M12 F male connector, 8-pin, stainless steel IP68/IP69K, hygiene design, 6 m long Connection cable with M12 F male connector, 8-pin, stainless steel IP68/IP69K, hygiene design, 12 m long SPARE PART 1 set of replacement seals, consisting of 2 seals (EPDM), ordering no. E-9278.0014 PRODUCT NUMBERS (OVERVIEW) PW37P Accuracy class Maximum capacity Ordering number Hottinger Brüel & Kjaer GmbH Im Tiefen See 45 ⋅ 64293 Darmstadt ⋅ Germany Tel....
Abrir o catálogo na página 4Todos os catálogos e folhetos técnicos HBM Test and Measurement
-
K3607
2 Páginas
-
K800
2 Páginas
-
DSE-HIE
8 Páginas
-
FS62WSR
3 Páginas
-
FS62PSR
3 Páginas
-
PACEline
10 Páginas
-
PMX Measuring amplifier system
16 Páginas
-
QuantumX
14 Páginas
-
Pressure
8 Páginas
-
Torque T40B
8 Páginas
-
HBM eStrain Gauge Catalog
90 Páginas
Catálogos arquivados
-
Digital Weighing Brochure
8 Páginas
-
HBM weighing technology for industry
12 Páginas
-
Strain Gages and Accessories
100 Páginas