Catálogos >
HAMAMATSU >
WIDE BANDWIDTH AMPLIFIER UNIT C6438-02

WIDE BANDWIDTH AMPLIFIER UNIT C6438-02
1 / 2Páginas

Excertos do catálogo

WIDE BANDWIDTH AMPLIFIER UNIT C6438-02 - 1

WIDE BANDWIDTH AMPLIFIER UNIT C6438-02 The output signal from a photomultiplier tube can be directly input to the C6438-02 and it provides a voltage output signal with 50 Ω load at a conversion factor of 5 mV/µA. The C6438-02 has a selecting switch to get the amplified non inverting-inverting output. FEATURES GWide Bandwidth: DC to 50 MHz GCurrent-to-voltage Conversion Factor: 5 mV/µA at 50 Ω load resistance GNon-inverting / Inverting Output Switchable GRise Time: 7 ns (Typ.) GCompact . Light Weight Figure 1: Typical Frequency Response Parameter Frequency Bandwidth (-3 dB) Voltage Gain A Current-to-voltage Load Resistance: 1 MΩ Conversion Factor Load Resistance: 50 Ω Typ. Rise Time Input Polarity Amplifying Method Input Impedance Recommended Load Resistance Maximum Output Load Resistance: 1 MΩ Load Resistance: 50 Ω Signal Voltage Typ. Output Offset Voltage A Max. Output Noise Voltage A Input Output Connector Power Power Supply Voltage Max. Power Supply Voltage Max. Power Supply Current Operating Temperature Storage Temperature Weight NOTE: ALoad Resistance: 50 Ω Description / Value DC to 50 MHz 40 dB ± 3 dB (Approx. 100 times) 10 mV/µA 5 mV/µA 7 ns Positive / Negative Non-inverting / Inverting Output B 50 Ω 50 Ω ±3.0 V Min. ±1.3 V Min. ±1 mV 2 mV rms BNC-R BNC-R DIN (6-pin) ±5 V ±6.5 V ±140 mA 0 °C to +40 °C -10 °C to +60 °C Approx. 165 g Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2013 Hamamatsu Photonics K.K.

Abrir o catálogo na página 1

WIDE BANDWIDTH AMPLIFIER UNIT C6438-02 - 2

WIDE BANDWIDTH AMPLIFIER UNIT C6438-02 Figure 2: Dimensional Outline (Unit: mm) ALUMINUM HOUSING PADDED RUBBER MOUNTING THREADED HOLES (2-M3 DEPTH 5) * Power cable with a plug connector attached at one end is supplied with the C6438-02. Figure 3: Internal Connection Diagram C6438-02 WIRE COLOR Red White Yellow Blue Green Black Shield RELATED PRODUCTS AMPLIFIER UNITS SELECTION GUIDE Parameter DC to 20 kHz or Frequency DC to 200 kHz DC to 1 MHz DC to 10 MHz Bandwidth (-3 dB) (switchable) Current-to-Voltage -0.1 V/µA, Conversion Factor -1 V/µA, -10 V/µA -1 V/µA * +50 mV/µA (Load Resistance: 50...

Abrir o catálogo na página 2